to create and rate content, and to follow, bookmark, and share content with other members.
Question asked by
on Nov 15, 2007
on Nov 16, 2007 by mkelly
Show 0 Likes
Is it possible to have a non tinted linear polarizer that has at parallel transmittance of 80% but a crossed transmittance less than 1% please help me out with this
No one else has this question
Mark as assumed answered
This content has been marked as final.
Show 1 comment
(Required, will not be published)
Nov 16, 2007 12:04 AM
Agilent doesn't make or sell polarizing film and I'm not particularly familiar with what is on the market. Maybe some of our other participants can add information.
But 80% transmission for the desired polarization (40% for unpolarized light) seems to be a pretty high quality film and I don't know where you will find still higher transmitting film. The <1% transmission for the rejected polarization should be realistic. I think such film can be obtained from some of the general optical and scientific suppliers, whose catalogs are on the internet.
For higher performance you will probably need to use a polarizer based on coated glass or prism optics. These are often available from the same suppliers. Of course they are not available for such large areas as film if that is also important.
Since you use the word "tint" I guess you may be looking for a polarizer for the visible wavelength region. Anyway the specifications to the wavelength range will be important to match to your need and a wide range with good transmission would indicate that it is "untinted".
Show 0 Likes
Retrieving data ...
Use 32 Bit Windows IBIS Model on 64 bit Windows ADS
E5071: Difficulty saving Trace Data - Corrupt output files
E5071 Code Emulation on E5080A
SCPI Commands different between E5070A and E5080A