to create and rate content, and to follow, bookmark, and share content with other members.
Maury Cal Kit Definition file for E5071C
Question asked by
on May 21, 2010
on May 23, 2010 by odanzy
Show 0 Likes
Could someone please post the E5071C definition files for Maury kits 8550E and 8650K.
No one else has this question
Mark as assumed answered
This content has been marked as final.
Show 1 comment
(Required, will not be published)
May 23, 2010 11:00 AM
If you have the values for the cal kit definitions, then you can enter them in manually. If not, you need to get the standard definitions from Maury.
ENA WebHelp - Modifying a cal kit definition:
http://ena.tm.agilent.com/e5071c/manual ... nition.htm
In some cases you should be able to contact Maury and they may be able to send you a file for a specific analyzer (I know they done this for the PNA series in the past).
Show 0 Likes
Retrieving data ...
GPIB/SCPI Commands wtih Agilent E8361A
SystemVue Connected Solution (Connected to Keysight Instruments)
Connecting SystemVue to Test Instruments for DPD Measurement
How to choose the right optical power meter for 850 nm signals
On a E4438C when using a PRAM file for data I was able to add a data bit with non burst too turn off the carrier. I can not seem to do this with the N5182B using the same PRAM file. How do I turn off the RF?