"certain commands seem to be only available in the vb development environment and not recognized by the pnax, is it possible to remedy this? commands like loadpicture or filedialog are not compatible with the pna"
"although if there is an alternative method to select and recall a file with the Recall commad or load a jpeg or other picture file? please let me know. the pictures are to show the rf connections that are need to performed and the recalled files are to be used with the equation editor."
"also in the equation editor where is the chirp z transform or where is the library that needs to be imported?"
"for testing purposes, after a response thru cal is performed, an electrical delay is added to simulate a linear delay, with the equation editor, s21phase=phase(unwrap(s21)) to display the unwrapped phase only portion, then using the real(s21phase) on the display of the pna should the phase appear to be flat or does the electrical delay still create a slope?"
"1. i could be mistaken, but i thought joel had demonstrated the unwrap and chirp z function in the pna, it was not in the default library and had to be loaded-please forward to joel. "
"2. using the front panel of the pnax to recall a file provides the user with an interface to navigate to the file. in programing the pnax and using the app.recall does not, one has to supply or code in the desired .s2p file, i would like to have the flexibilty to select and recall a file. "
"2a. is there another command that would allow navigation to the desired s2p file? 2b. what window command should i use?"
"in the pnax user function,1. is there a plain fft (no zero padding) available in the analysis/equation editor?2. where can i find or download the bestfit.dll?"
"c:\program files\agilent\network analyzer\userfunctions"
"looked for a "fft" function in the path provided but could not find, is it in the bestfit.dll? this one is not listed, where can i download? many thanks"
Retrieving data ...