I have a 8753D with the old CPU board and firmware version 6.14 and was wondering if it is compatible with the 85093C ecal kit in combination with the 86097B interface module (which we have laying around...)
Thank you and regards
This required 7.68 (or higher) firmware for ecal support and that did not come around until some time for the 8753E - 8753ET - 8753ES (if I am not mistaken). Take a look at this document 85091011.pdf.
(I do not believe you can get you 8753D from 6.14 to 7.68 firmware).
Well, the HP8753D can be upgraded to the v7+ firmwares but it requires a new CPU board. They are quiet readily available used but I hoped to avoid it because the calibration on mine is very recent and I would need to figure out how to transfer the calibration data from the old board to the new board.
Retrieving data ...