AnsweredAssumed Answered

CW reponce time of PNA/8530

Question asked by yarien on Oct 6, 2006
Latest reply on Oct 31, 2006 by yarien
When testing the performance of an "Antenna Chamber" one has to scan the ripple in the Quite zone of the chamber.
To do this the analyzer is transmitting a CW signal and a scanner is moving from point to point.
The CW frequency can be between 500 MHz and 20 Ghz and the used If-bandwith is set to 10kHz (can also be varied).

Is there a period one has to wait for the analyzer to get the exact measured value (not scanning faster then the analyzer can)?
Lots of thanks in advance


Yoeri  

Outcomes