For my UXA Signal Analyzer, what applications support option H1G (1 GHz Analysis Bandwidth) and what additional functionality does it provide?
Option H1G also includes the option B2X digitizer (255 MHz Analysis Bandwidth). Therefore, option H1G is supported by all applications that support B2X up to at least 255 MHz bandwidth. Option H1G additionally provides 1 GHz analysis bandwidth for the following measurement applications: 89601B VSA software, N9067C Pulse Measurement Application, as well as the IQ Analyzer mode in the UXA. When using the Real Time Spectrum Analyzer (RTSA) for instruments with H1G, the maximum real time bandwidth is limited to 255 MHz. In the Spectrum Analyzer mode, the maximum bandwidth for the CCDF and Burst Power measurement is also 255 MHz.
Option H1G also provides an additional 1 GHz wide IF output centered at 750 MHz that is nominally 20 dB higher in amplitude than the option CR3 IF output. The IF output is flatter than the CR3 IF output due to fewer active components and being prior to the anti-alias filter used by H1G.
N9040B Configuration Guide
N9041B Configuration Guide
Retrieving data ...