AnsweredAssumed Answered

microstrip bandpass filter at 2.4 GHz

Question asked by shruti003 on Apr 23, 2015
Latest reply on Apr 23, 2015 by sdgrant
hey, i am designing microstrip bandpass filter st 2.4 GHz using FR4 as substrate (dielectric constant-4.4, tand 0.002, height-1.58 mm , thickness-0.035, cond-4.1+7) using ads 2011.10. My schematic is giving good result but on generation of layout, the layout results are coming entirely different from the schematic results..Can u help me with the possible solutions or corrections need to b done so that my layout S11 S21 plots come similar to schematic to some extent..
Below are the results i am getting(attached).  

Outcomes