The same commands can be executed with TekVISA successfully.
|---------+---------------------------->
| | cckuoj@tsmc.com |
| | |
| | 2008/06/05 03:10 |
| | PM |
| | Please respond to|
| | cckuoj |
| | |
|---------+---------------------------->
>------------------------------------------------------------------------------------------------------------------------------|
| |
| To: VRF <vrf@agilent.com> |
| cc: |
| Subject: [Spam] [vrf] To control Tektronix TLA7000 TPG |
>------------------------------------------------------------------------------------------------------------------------------|
Hi All,
We are trying to control pattern generator (TPG) of Tektronix TLA7000 series logic analyzers. Some commands are successfully executed such as TPG:RUN, TPG:STOP, TPS:GRS, etc. But some commands can not be executed smoothly such as TPG:LS, TPG:SOL, etc.
One of the failed message is attached. Please help to review and give us your advice. Your help is highly appreciated. Thank you !!
Please be free to contact me in case of any questions.
Best regards,
Chester Kuo
(See attached file: TLA7012_TPG-LS-error-message.jpg)
---
You are currently subscribed to vrf as: cckuoj@tsmc.com To subscribe please send an email to: "vrf-request@lists.it.agilent.com"
with the word subscribe in the message body.
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "
http://www.vrfarchive.com/vrf_archive".
Search the Agilent vrf archive at "http://vee.engineering.agilent.com".
#### TLA7012_TPG-LS-error-message.jpg has been removed from this note on June 06 2008 by CCKUOJ
---------------------------------------------------------------------------
TSMC PROPERTY
This email communication (and any attachments) is proprietary information
for the sole use of its
intended recipient. Any unauthorized review, use or distribution by anyone
other than the intended
recipient is strictly prohibited. If you are not the intended recipient,
please notify the sender by
replying to this email, and then delete this email and any copies of it
immediately. Thank you.
---------------------------------------------------------------------------
---
You are currently subscribed to vrf as: ming_meng@agilent.com To subscribe please send an email to: "vrf-request@lists.it.agilent.com" with the word subscribe in the message body.
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "http://www.vrfarchive.com/vrf_archive".
Search the Agilent vrf archive at "http://vee.engineering.agilent.com".
|---------+---------------------------->
| | cckuoj@tsmc.com |
| | |
| | 2008/06/05 03:10 |
| | PM |
| | Please respond to|
| | cckuoj |
| | |
|---------+---------------------------->
>------------------------------------------------------------------------------------------------------------------------------|
| |
| To: VRF <vrf@agilent.com> |
| cc: |
| Subject: [Spam] [vrf] To control Tektronix TLA7000 TPG |
>------------------------------------------------------------------------------------------------------------------------------|
Hi All,
We are trying to control pattern generator (TPG) of Tektronix TLA7000 series logic analyzers. Some commands are successfully executed such as TPG:RUN, TPG:STOP, TPS:GRS, etc. But some commands can not be executed smoothly such as TPG:LS, TPG:SOL, etc.
One of the failed message is attached. Please help to review and give us your advice. Your help is highly appreciated. Thank you !!
Please be free to contact me in case of any questions.
Best regards,
Chester Kuo
(See attached file: TLA7012_TPG-LS-error-message.jpg)
---
You are currently subscribed to vrf as: cckuoj@tsmc.com To subscribe please send an email to: "vrf-request@lists.it.agilent.com"
with the word subscribe in the message body.
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "
http://www.vrfarchive.com/vrf_archive".
Search the Agilent vrf archive at "http://vee.engineering.agilent.com".
#### TLA7012_TPG-LS-error-message.jpg has been removed from this note on June 06 2008 by CCKUOJ
---------------------------------------------------------------------------
TSMC PROPERTY
This email communication (and any attachments) is proprietary information
for the sole use of its
intended recipient. Any unauthorized review, use or distribution by anyone
other than the intended
recipient is strictly prohibited. If you are not the intended recipient,
please notify the sender by
replying to this email, and then delete this email and any copies of it
immediately. Thank you.
---------------------------------------------------------------------------
---
You are currently subscribed to vrf as: ming_meng@agilent.com To subscribe please send an email to: "vrf-request@lists.it.agilent.com" with the word subscribe in the message body.
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "http://www.vrfarchive.com/vrf_archive".
Search the Agilent vrf archive at "http://vee.engineering.agilent.com".