Attached is a simple neural network I used to experiment with prior to using 3rd party software. You need to determine the coeficients/weighting for yourself or use those already established. The reliability tends to work better with 1 output value for every descision as apposed to the 2 outputs in the attached. Hope this helps.
regards,
Allan A Thomson CEng MIMechE
HYPERLINK "mailto:allan.strathardo@virgin.net"allan.strathardo@virgin.net
HYPERLINK "http://www.strathardo.com"www.strathardo.com
Mobile: +44 (0)7786 917603
----- Original Message -----
From: HYPERLINK "mailto:kolopipo@yahoo.com"fdg Fgj
To: HYPERLINK "mailto:vrf@agilent.com"VRF
Sent: Thursday, September 18, 2008 8:38 AM
Subject: [vrf] Help with doing neural network using VEE 8.5 student version
I am trying to do ECG classification using neural netwrok. The problem is 8.5 student doesn't have matlab functions. Even if it has matlab functions, the list of function is no enough to do neural network. I am sure the VEE doesn't have neural network toolbox to do functions like "sim" and "net". Any ideas on how to do do or even start this neural network? Or I had no choice but to link an external program like C/C++ to do this? I had been thinking about this for few days and still stuck!!!!
--- You are currently subscribed to vrf as: allan.strathardo@virgin.net To subscribe please send an email to: "vrf-request@lists.it.agilent.com" with the word subscribe in the message body. To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com". To send messages to this mailing list, email "vrf@agilent.com". If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com". Search the "unofficial vrf archive" at "http://www.vrfarchive.com/vrf_archive". Search the Agilent vrf archive at "http://vee.engineering.agilent.com".
---
You are currently subscribed to vrf as: hua_jing@agilent.com
To subscribe please send an email to: "vrf-request@lists.it.agilent.com" with the word subscribe in the message body.
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to
"owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "http://www.vrfarchive.com/vrf_archive".
Search the Agilent vrf archive at "http://vee.engineering.agilent.com".
regards,
Allan A Thomson CEng MIMechE
HYPERLINK "mailto:allan.strathardo@virgin.net"allan.strathardo@virgin.net
HYPERLINK "http://www.strathardo.com"www.strathardo.com
Mobile: +44 (0)7786 917603
----- Original Message -----
From: HYPERLINK "mailto:kolopipo@yahoo.com"fdg Fgj
To: HYPERLINK "mailto:vrf@agilent.com"VRF
Sent: Thursday, September 18, 2008 8:38 AM
Subject: [vrf] Help with doing neural network using VEE 8.5 student version
I am trying to do ECG classification using neural netwrok. The problem is 8.5 student doesn't have matlab functions. Even if it has matlab functions, the list of function is no enough to do neural network. I am sure the VEE doesn't have neural network toolbox to do functions like "sim" and "net". Any ideas on how to do do or even start this neural network? Or I had no choice but to link an external program like C/C++ to do this? I had been thinking about this for few days and still stuck!!!!
--- You are currently subscribed to vrf as: allan.strathardo@virgin.net To subscribe please send an email to: "vrf-request@lists.it.agilent.com" with the word subscribe in the message body. To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com". To send messages to this mailing list, email "vrf@agilent.com". If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com". Search the "unofficial vrf archive" at "http://www.vrfarchive.com/vrf_archive". Search the Agilent vrf archive at "http://vee.engineering.agilent.com".
---
You are currently subscribed to vrf as: hua_jing@agilent.com
To subscribe please send an email to: "vrf-request@lists.it.agilent.com" with the word subscribe in the message body.
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to
"owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "http://www.vrfarchive.com/vrf_archive".
Search the Agilent vrf archive at "http://vee.engineering.agilent.com".
I need to take the data from an accelerometer and calculate the velocity.
How do I do this?
I have the array of data, but I am not sure how to calculate the velocity.
I am using VEE 5.1.
Thank you.
. . This message (including any attachments) contains confidential and/or proprietary information intended only for the addressee. Any unauthorized disclosure, copying, distribution or reliance on the contents of this information is strictly prohibited and may constitute a violation of law. If you are not the intended recipient, please notify the sender immediately by responding to this e-mail, and delete the message from your system. If you have any questions about this e-mail please notify the sender immediately.
---
You are currently subscribed to vrf as: hua_jing@agilent.com
To subscribe please send an email to: "vrf-request@lists.it.agilent.com" with the word subscribe in the message body.
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to
"owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "http://www.vrfarchive.com/vrf_archive".
Search the Agilent vrf archive at "http://vee.engineering.agilent.com".