AnsweredAssumed Answered

vrf PNA E8364B Setup

Question asked by VRFuser on Sep 24, 2007
I found that Agilent has a forum for talking remotely to Network Analyzers so I post this there, since this is a PNA/SCPI question than a VEE.

 

Thanks,

M.Doe

 

  _____  

From: Doe, Munehiro [mailto:Munehiro.Doe@Herley.Com]
Sent: Monday, September 24, 2007 9:32 AM
To: VRF
Subject: [vrf] PNA E8364B Setup

 

Equipment:

PNA E8364B (firmware A.06.04.28)

Option 083 "Vector & scalar calibrated converter measurements"

ECAL Module connected to USB on PNA

 

I am new to the PNA and am assigned to test Vee userfunctions that use subset of SCPI commands under

SENSe:CORRection:COLLect:SESSion:VMC

 

I am getting errors such as this:

SENS:CORR:COLL:SESS6:VMC:OPER CAL

                                    ^

1080,ERROR: The session does not exist. Open the session and try again.

 

Not being familiar with the PNA, I searched the  pnahelp_487.chm and vrf archives trying to find out how and when a session is created, to no success.

I also ran this command, which might shed light on what I have not setup.

SENS:CORR:COLL:SESS6:INIT 'VMC'

                                    ^

+106, Requested measurement not found.

 

Could anyone please set me on the correct path?

 

Thanks,

M. Doe

 

 

 


---
You are currently subscribed to vrf as: Munehiro.Doe@herley.com
To subscribe please send an email to: "vrf-request@lists.it.agilent.com" with the word subscribe in the message body.
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to
"owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "http://www.vrfarchive.com/vrf_archive".
Search the Agilent vrf archive at "http://vee.engineering.agilent.com".


---
You are currently subscribed to vrf as: ming_meng@agilent.com
To subscribe please send an email to: "vrf-request@lists.it.agilent.com" with the word subscribe in the message body.
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to
"owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "http://www.vrfarchive.com/vrf_archive".
Search the Agilent vrf archive at "http://vee.engineering.agilent.com".  

Outcomes