AnsweredAssumed Answered

vrf Parallel Port programming in VEE

Question asked by VRFuser on Sep 20, 2005
Latest reply on Sep 20, 2005 by VRFuser

Like • Show 0 Likes0
Comment • 17

Damian,
perhaps you could use this:

www.alytec.com
/Downloads/LptPort.DLL

Detlef

---
You are currently subscribed to vrf as: rsb@soco.agilent.com
To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".

No one else has this question

Outcomes

17 Replies

damian.goderich Sep 18, 2005 9:27 PM
Mark Correct
Correct Answer

>   Hi all,
>
       Does anyone have a sample Vee program or driver for WIN XP
that interfaces the parallel port?
      I am looking to write to the port only.   I need to be able to
set 8 data bits and 4 control bits.

      Thanks
      Damian

---
You are currently subscribed to vrf as: rsb@soco.agilent.com
To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".
Like • Show 0 Likes0
Actions
damian.goderich Sep 18, 2005 9:27 PM
Mark Correct
Correct Answer

>   Hi all,
>
       Does anyone have a sample Vee program or driver for WIN XP
that interfaces the parallel port?
      I am looking to write to the port only.   I need to be able to
set 8 data bits and 4 control bits.

      Thanks
      Damian

---
You are currently subscribed to vrf as: rsb@soco.agilent.com
To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".
Like • Show 0 Likes0
Actions
damian.goderich Sep 18, 2005 9:27 PM
Mark Correct
Correct Answer

>   Hi all,
>
       Does anyone have a sample Vee program or driver for WIN XP
that interfaces the parallel port?
      I am looking to write to the port only.   I need to be able to
set 8 data bits and 4 control bits.

      Thanks
      Damian

---
You are currently subscribed to vrf as: rsb@soco.agilent.com
To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".
Like • Show 0 Likes0
Actions
mark.goldberg Sep 18, 2005 11:41 PM
Mark Correct
Correct Answer
Damian,

At the bottom of the VRF e-mails there is a line:

Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".

If you go to this site and do a search from the search page you will get a list of past VRF e-mails that have the various methods that have been submitted over the years. You can try them and see which one works best for you. There you will find several methods including Peekpoke.vee or something of this type as well as some that use dll's or third party drivers. There are also many e-mails with the associated discussion of the pros and cons for each method.

Hope this helps.

Mark

-----Original Message-----
From: Goderich, Damian [mailto:damian.goderich@boeing.com]
Sent: Monday, September 19, 2005 12:28 PM
To: VRF
Subject: [vrf] Parallel Port programming in VEE

>   Hi all,
>
       Does anyone have a sample Vee program or driver for WIN XP
that interfaces the parallel port?
      I am looking to write to the port only.   I need to be able to
set 8 data bits and 4 control bits.

      Thanks
      Damian

---
You are currently subscribed to vrf as: Mark.Goldberg@atk.com
To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".

---
You are currently subscribed to vrf as: rsb@soco.agilent.com
To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".
Like • Show 0 Likes0
Actions
mark.goldberg Sep 18, 2005 11:41 PM
Mark Correct
Correct Answer
Damian,

At the bottom of the VRF e-mails there is a line:

Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".

If you go to this site and do a search from the search page you will get a list of past VRF e-mails that have the various methods that have been submitted over the years. You can try them and see which one works best for you. There you will find several methods including Peekpoke.vee or something of this type as well as some that use dll's or third party drivers. There are also many e-mails with the associated discussion of the pros and cons for each method.

Hope this helps.

Mark

-----Original Message-----
From: Goderich, Damian [mailto:damian.goderich@boeing.com]
Sent: Monday, September 19, 2005 12:28 PM
To: VRF
Subject: [vrf] Parallel Port programming in VEE

>   Hi all,
>
       Does anyone have a sample Vee program or driver for WIN XP
that interfaces the parallel port?
      I am looking to write to the port only.   I need to be able to
set 8 data bits and 4 control bits.

      Thanks
      Damian

---
You are currently subscribed to vrf as: Mark.Goldberg@atk.com
To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".

---
You are currently subscribed to vrf as: rsb@soco.agilent.com
To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".
Like • Show 0 Likes0
Actions
mark.goldberg Sep 18, 2005 11:41 PM
Mark Correct
Correct Answer
Damian,

At the bottom of the VRF e-mails there is a line:

Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".

If you go to this site and do a search from the search page you will get a list of past VRF e-mails that have the various methods that have been submitted over the years. You can try them and see which one works best for you. There you will find several methods including Peekpoke.vee or something of this type as well as some that use dll's or third party drivers. There are also many e-mails with the associated discussion of the pros and cons for each method.

Hope this helps.

Mark

-----Original Message-----
From: Goderich, Damian [mailto:damian.goderich@boeing.com]
Sent: Monday, September 19, 2005 12:28 PM
To: VRF
Subject: [vrf] Parallel Port programming in VEE

>   Hi all,
>
       Does anyone have a sample Vee program or driver for WIN XP
that interfaces the parallel port?
      I am looking to write to the port only.   I need to be able to
set 8 data bits and 4 control bits.

      Thanks
      Damian

---
You are currently subscribed to vrf as: Mark.Goldberg@atk.com
To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".

---
You are currently subscribed to vrf as: rsb@soco.agilent.com
To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".
Like • Show 0 Likes0
Actions
robert Sep 19, 2005 9:29 AM
Mark Correct
Correct Answer
Attention Agilent:

Here it is again, the semi-annual requirement for parallel port I/O. Why
are you unable to build this into VEE as a stand part of the product?

Robert Reavis

----- Original Message -----
From: "Goderich, Damian" <damian.goderich@boeing.com>
To: "VRF" <vrf@agilent.com>
Sent: Monday, September 19, 2005 12:27 PM
Subject: [vrf] Parallel Port programming in VEE

> Hi all,
>
Does anyone have a sample Vee program or driver for WIN XP
that interfaces the parallel port?
I am looking to write to the port only. I need to be able to
set 8 data bits and 4 control bits.

Thanks
Damian

---
You are currently subscribed to vrf as: robert@wscw.com
To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to
"owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".

---
You are currently subscribed to vrf as: rsb@soco.agilent.com
To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".
Like • Show 0 Likes0
Actions
robert Sep 19, 2005 9:29 AM
Mark Correct
Correct Answer
Attention Agilent:

Here it is again, the semi-annual requirement for parallel port I/O. Why
are you unable to build this into VEE as a stand part of the product?

Robert Reavis

----- Original Message -----
From: "Goderich, Damian" <damian.goderich@boeing.com>
To: "VRF" <vrf@agilent.com>
Sent: Monday, September 19, 2005 12:27 PM
Subject: [vrf] Parallel Port programming in VEE

> Hi all,
>
Does anyone have a sample Vee program or driver for WIN XP
that interfaces the parallel port?
I am looking to write to the port only. I need to be able to
set 8 data bits and 4 control bits.

Thanks
Damian

---
You are currently subscribed to vrf as: robert@wscw.com
To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to
"owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".

---
You are currently subscribed to vrf as: rsb@soco.agilent.com
To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".
Like • Show 0 Likes0
Actions
robert Sep 19, 2005 9:29 AM
Mark Correct
Correct Answer
Attention Agilent:

Here it is again, the semi-annual requirement for parallel port I/O. Why
are you unable to build this into VEE as a stand part of the product?

Robert Reavis

----- Original Message -----
From: "Goderich, Damian" <damian.goderich@boeing.com>
To: "VRF" <vrf@agilent.com>
Sent: Monday, September 19, 2005 12:27 PM
Subject: [vrf] Parallel Port programming in VEE

> Hi all,
>
Does anyone have a sample Vee program or driver for WIN XP
that interfaces the parallel port?
I am looking to write to the port only. I need to be able to
set 8 data bits and 4 control bits.

Thanks
Damian

---
You are currently subscribed to vrf as: robert@wscw.com
To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to
"owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".

---
You are currently subscribed to vrf as: rsb@soco.agilent.com
To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".
Like • Show 0 Likes0
Actions
VRFuser Sep 19, 2005 11:56 PM
Mark Correct
Correct Answer
The down-side for parallel port support is that there are so many
varieties of them: PS2, AT, "Standard", EPP, ECP, many of which do not
fully conform to the electrical specs, especially when it comes to
laptops. In my workplace, we are supporting some older devices that
connect to parallel port, and each time we upgrade computers we have a
new round of challenges in getting the hardware working again.

Although using the parallel port is free, there are some low-cost
alternatives that really merit consideration, such as Measurement
Computing's $99 USB-based 24-channel digital I/O module. I would rather
see native (i.e. not purchased) support for MC's products. That would
be a good partnership!

I DO agree with David Watling's wishlist, though. And a few of my own
wishlist items:
1) Ability to change ALL object properties, such as color, font,
position, etc.
2) Ability to change size/position/visibility of the MAIN panel/window
from code.
3) Support for object naming (like in the XY trace) such that any
object's properties can be set from a formula. I.e.
PassFailLabel.Color=Red
4) Support for relative paths in objects such as images and files. I
need my programs to be relocatable, so I have to jump through hoops to
initialize images before they are displayed on a panel, otherwise I get
errors. This makes the "display on execute" property useless for me.

But let me say, I do think the authors of VEE are doing an EXCELLENT job
adding new functionality. I'm sure we all use VEE in ways Agilent never
thought of, so it's easy to gripe without also giving credit where
credit is due. I started at VEE 3.0, and it has come a LONG way since
then.

-Robin

-----Original Message-----
From: Robert Reavis [mailto:robert@wscw.com]
Sent: Tuesday, September 20, 2005 2:29 AM
To: VRF
Subject: Re: [vrf] Parallel Port programming in VEE

Attention Agilent:

Here it is again, the semi-annual requirement for parallel port I/O.
Why
are you unable to build this into VEE as a stand part of the product?

Robert Reavis

----- Original Message -----
From: "Goderich, Damian" <damian.goderich@boeing.com>
To: "VRF" <vrf@agilent.com>
Sent: Monday, September 19, 2005 12:27 PM
Subject: [vrf] Parallel Port programming in VEE

> Hi all,
>
Does anyone have a sample Vee program or driver for WIN XP that
interfaces the parallel port?
I am looking to write to the port only. I need to be able to
set 8 data bits and 4 control bits.

Thanks
Damian

---
You are currently subscribed to vrf as: robert@wscw.com
To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".
To unsubscribe send a blank email to
"leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com". If you
need help with the mailing list send a message to
"owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".

---
You are currently subscribed to vrf as: rfindley@harris.com
To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".
To unsubscribe send a blank email to
"leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to
"owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".

---
You are currently subscribed to vrf as: rsb@soco.agilent.com
To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".
Like • Show 0 Likes0
Actions
VRFuser Sep 19, 2005 11:56 PM
Mark Correct
Correct Answer
The down-side for parallel port support is that there are so many
varieties of them: PS2, AT, "Standard", EPP, ECP, many of which do not
fully conform to the electrical specs, especially when it comes to
laptops. In my workplace, we are supporting some older devices that
connect to parallel port, and each time we upgrade computers we have a
new round of challenges in getting the hardware working again.

Although using the parallel port is free, there are some low-cost
alternatives that really merit consideration, such as Measurement
Computing's $99 USB-based 24-channel digital I/O module. I would rather
see native (i.e. not purchased) support for MC's products. That would
be a good partnership!

I DO agree with David Watling's wishlist, though. And a few of my own
wishlist items:
1) Ability to change ALL object properties, such as color, font,
position, etc.
2) Ability to change size/position/visibility of the MAIN panel/window
from code.
3) Support for object naming (like in the XY trace) such that any
object's properties can be set from a formula. I.e.
PassFailLabel.Color=Red
4) Support for relative paths in objects such as images and files. I
need my programs to be relocatable, so I have to jump through hoops to
initialize images before they are displayed on a panel, otherwise I get
errors. This makes the "display on execute" property useless for me.

But let me say, I do think the authors of VEE are doing an EXCELLENT job
adding new functionality. I'm sure we all use VEE in ways Agilent never
thought of, so it's easy to gripe without also giving credit where
credit is due. I started at VEE 3.0, and it has come a LONG way since
then.

-Robin

-----Original Message-----
From: Robert Reavis [mailto:robert@wscw.com]
Sent: Tuesday, September 20, 2005 2:29 AM
To: VRF
Subject: Re: [vrf] Parallel Port programming in VEE

Attention Agilent:

Here it is again, the semi-annual requirement for parallel port I/O.
Why
are you unable to build this into VEE as a stand part of the product?

Robert Reavis

----- Original Message -----
From: "Goderich, Damian" <damian.goderich@boeing.com>
To: "VRF" <vrf@agilent.com>
Sent: Monday, September 19, 2005 12:27 PM
Subject: [vrf] Parallel Port programming in VEE

> Hi all,
>
Does anyone have a sample Vee program or driver for WIN XP that
interfaces the parallel port?
I am looking to write to the port only. I need to be able to
set 8 data bits and 4 control bits.

Thanks
Damian

---
You are currently subscribed to vrf as: robert@wscw.com
To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".
To unsubscribe send a blank email to
"leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com". If you
need help with the mailing list send a message to
"owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".

---
You are currently subscribed to vrf as: rfindley@harris.com
To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".
To unsubscribe send a blank email to
"leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to
"owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".

---
You are currently subscribed to vrf as: rsb@soco.agilent.com
To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".
Like • Show 0 Likes0
Actions
VRFuser Sep 19, 2005 11:56 PM
Mark Correct
Correct Answer
The down-side for parallel port support is that there are so many
varieties of them: PS2, AT, "Standard", EPP, ECP, many of which do not
fully conform to the electrical specs, especially when it comes to
laptops. In my workplace, we are supporting some older devices that
connect to parallel port, and each time we upgrade computers we have a
new round of challenges in getting the hardware working again.

Although using the parallel port is free, there are some low-cost
alternatives that really merit consideration, such as Measurement
Computing's $99 USB-based 24-channel digital I/O module. I would rather
see native (i.e. not purchased) support for MC's products. That would
be a good partnership!

I DO agree with David Watling's wishlist, though. And a few of my own
wishlist items:
1) Ability to change ALL object properties, such as color, font,
position, etc.
2) Ability to change size/position/visibility of the MAIN panel/window
from code.
3) Support for object naming (like in the XY trace) such that any
object's properties can be set from a formula. I.e.
PassFailLabel.Color=Red
4) Support for relative paths in objects such as images and files. I
need my programs to be relocatable, so I have to jump through hoops to
initialize images before they are displayed on a panel, otherwise I get
errors. This makes the "display on execute" property useless for me.

But let me say, I do think the authors of VEE are doing an EXCELLENT job
adding new functionality. I'm sure we all use VEE in ways Agilent never
thought of, so it's easy to gripe without also giving credit where
credit is due. I started at VEE 3.0, and it has come a LONG way since
then.

-Robin

-----Original Message-----
From: Robert Reavis [mailto:robert@wscw.com]
Sent: Tuesday, September 20, 2005 2:29 AM
To: VRF
Subject: Re: [vrf] Parallel Port programming in VEE

Attention Agilent:

Here it is again, the semi-annual requirement for parallel port I/O.
Why
are you unable to build this into VEE as a stand part of the product?

Robert Reavis

----- Original Message -----
From: "Goderich, Damian" <damian.goderich@boeing.com>
To: "VRF" <vrf@agilent.com>
Sent: Monday, September 19, 2005 12:27 PM
Subject: [vrf] Parallel Port programming in VEE

> Hi all,
>
Does anyone have a sample Vee program or driver for WIN XP that
interfaces the parallel port?
I am looking to write to the port only. I need to be able to
set 8 data bits and 4 control bits.

Thanks
Damian

---
You are currently subscribed to vrf as: robert@wscw.com
To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".
To unsubscribe send a blank email to
"leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com". If you
need help with the mailing list send a message to
"owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".

---
You are currently subscribed to vrf as: rfindley@harris.com
To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".
To unsubscribe send a blank email to
"leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to
"owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".

---
You are currently subscribed to vrf as: rsb@soco.agilent.com
To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".
Like • Show 0 Likes0
Actions
watling Sep 19, 2005 11:57 PM
Mark Correct
Correct Answer

Here, here! - and while you're about it, how about:

1. Triadic operators (A?B:C) working on all elements of an array?
2. Supporting Recursion?
3. All 'C' types supported, for use in dll calls?

Any other missing features that should be fixed?

David Watling

-----Original Message-----
From: Robert Reavis [mailto:robert@wscw.com]
Sent: 20 September 2005 08:29
To: VRF
Subject: Re: [vrf] Parallel Port programming in VEE

Attention Agilent:

Here it is again, the semi-annual requirement for parallel port I/O.
Why
are you unable to build this into VEE as a stand part of the product?

Robert Reavis

----- Original Message -----
From: "Goderich, Damian" <damian.goderich@boeing.com>
To: "VRF" <vrf@agilent.com>
Sent: Monday, September 19, 2005 12:27 PM
Subject: [vrf] Parallel Port programming in VEE

> Hi all,
>
Does anyone have a sample Vee program or driver for WIN XP
that interfaces the parallel port?
I am looking to write to the port only. I need to be able to
set 8 data bits and 4 control bits.

Thanks
Damian

---
You are currently subscribed to vrf as: robert@wscw.com
To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".
To unsubscribe send a blank email to
"leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to
"owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".

---
You are currently subscribed to vrf as: watling@icerasemi.com
To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".
To unsubscribe send a blank email to
"leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to
"owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".

---
You are currently subscribed to vrf as: rsb@soco.agilent.com
To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".
Like • Show 0 Likes0
Actions
watling Sep 19, 2005 11:57 PM
Mark Correct
Correct Answer

Here, here! - and while you're about it, how about:

1. Triadic operators (A?B:C) working on all elements of an array?
2. Supporting Recursion?
3. All 'C' types supported, for use in dll calls?

Any other missing features that should be fixed?

David Watling

-----Original Message-----
From: Robert Reavis [mailto:robert@wscw.com]
Sent: 20 September 2005 08:29
To: VRF
Subject: Re: [vrf] Parallel Port programming in VEE

Attention Agilent:

Here it is again, the semi-annual requirement for parallel port I/O.
Why
are you unable to build this into VEE as a stand part of the product?

Robert Reavis

----- Original Message -----
From: "Goderich, Damian" <damian.goderich@boeing.com>
To: "VRF" <vrf@agilent.com>
Sent: Monday, September 19, 2005 12:27 PM
Subject: [vrf] Parallel Port programming in VEE

> Hi all,
>
Does anyone have a sample Vee program or driver for WIN XP
that interfaces the parallel port?
I am looking to write to the port only. I need to be able to
set 8 data bits and 4 control bits.

Thanks
Damian

---
You are currently subscribed to vrf as: robert@wscw.com
To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".
To unsubscribe send a blank email to
"leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to
"owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".

---
You are currently subscribed to vrf as: watling@icerasemi.com
To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".
To unsubscribe send a blank email to
"leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to
"owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".

---
You are currently subscribed to vrf as: rsb@soco.agilent.com
To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".
Like • Show 0 Likes0
Actions
watling Sep 19, 2005 11:57 PM
Mark Correct
Correct Answer

Here, here! - and while you're about it, how about:

1. Triadic operators (A?B:C) working on all elements of an array?
2. Supporting Recursion?
3. All 'C' types supported, for use in dll calls?

Any other missing features that should be fixed?

David Watling

-----Original Message-----
From: Robert Reavis [mailto:robert@wscw.com]
Sent: 20 September 2005 08:29
To: VRF
Subject: Re: [vrf] Parallel Port programming in VEE

Attention Agilent:

Here it is again, the semi-annual requirement for parallel port I/O.
Why
are you unable to build this into VEE as a stand part of the product?

Robert Reavis

----- Original Message -----
From: "Goderich, Damian" <damian.goderich@boeing.com>
To: "VRF" <vrf@agilent.com>
Sent: Monday, September 19, 2005 12:27 PM
Subject: [vrf] Parallel Port programming in VEE

> Hi all,
>
Does anyone have a sample Vee program or driver for WIN XP
that interfaces the parallel port?
I am looking to write to the port only. I need to be able to
set 8 data bits and 4 control bits.

Thanks
Damian

---
You are currently subscribed to vrf as: robert@wscw.com
To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".
To unsubscribe send a blank email to
"leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to
"owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".

---
You are currently subscribed to vrf as: watling@icerasemi.com
To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".
To unsubscribe send a blank email to
"leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to
"owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".

---
You are currently subscribed to vrf as: rsb@soco.agilent.com
To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".
Like • Show 0 Likes0
Actions
VRFuser Sep 20, 2005 6:45 PM
Mark Correct
Correct Answer
Damian,
perhaps you could use this:

www.alytec.com
/Downloads/LptPort.DLL

Detlef

---
You are currently subscribed to vrf as: rsb@soco.agilent.com
To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".
Like • Show 0 Likes0
Actions
VRFuser Sep 20, 2005 6:45 PM
Mark Correct
Correct Answer
Damian,
perhaps you could use this:

www.alytec.com
/Downloads/LptPort.DLL

Detlef

---
You are currently subscribed to vrf as: rsb@soco.agilent.com
To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".
Like • Show 0 Likes0
Actions

vrf Parallel Port programming in VEE

Outcomes

Related Content

Recommended Content