AnsweredAssumed Answered

vrf AW: Compile or Rewrap IVI driver from C-code

Question asked by detlef.baranski on Feb 2, 2005
If you have the source code, you may make a dll out of it so that you can
use it in vee- general speaking ...

You have to adapt the dll inputs and outputs to standard ansi C
declarations.
I think Shawn did send some rules and examples in the past.
Maybe have a look at his OSWEGO etc....

Or send it as kindly offered below . The (VRF) Force is with you
detlef




-----Ursprngliche Nachricht-----
Von: Jeremy Wong [mailto:jeremy@miko.hk]
Gesendet: Mittwoch, 2. Februar 2005 02:45
An: VRF
Betreff: [vrf] Re: Compile or Rewrap IVI driver from C-code


Please kindly post the C source codes here so that we may help.


Regards,
Jeremy Wong

----- Original Message -----
From: <Henrik.Hald@nokia.com>
To: "VRF" <vrf@agilent.com>
Sent: Tuesday, February 01, 2005 11:05 PM
Subject: [vrf] Compile or Rewrap IVI driver from C-code


> Hi All
>
> I have the "source code" (C code) for an IVI driver, how do I make it
> usable in VEE.
>
> As I understand there are two versions of IVI drivers IVI-Com and IVI-C
> drivers.
> All examples are normally with the COM type.
>
> What is an IVI-C driver, is that what I have ?
>
> How do I compile or rewrap my driver (C-code) for use in Vee7 ?
>
> Venlig hilsen, Terveisin, Kind regards
> Henrik Damborg Hald
>
> ---
> You are currently subscribed to vrf as: wong@miko.com.hk
> To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".
> To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
> To send messages to this mailing list,  email "vrf@agilent.com".
> If you need help with the mailing list send a message to
> "owner-vrf@it.lists.it.agilent.com".
>
>


---
You are currently subscribed to vrf as: Detlef.Baranski@PILKINGTON.de
To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list,  email "vrf@agilent.com". 
If you need help with the mailing list send a message to
"owner-vrf@it.lists.it.agilent.com".
This message and any attachments are confidential, for the exclusive use of
the addressee and may be legally privileged. Any other distribution, use or
reproduction is unauthorised and prohibited. If you have received this
message in error, please notify the sender immediately and delete the
message from your system.

Visit our internet site at http://www.pilkington.com

---
You are currently subscribed to vrf as: rsb@soco.agilent.com
To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list,  email "vrf@agilent.com". 
If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com".

Outcomes