AnsweredAssumed Answered

vrf 34980 commands

Question asked by fukui.yutaka on Sep 7, 2007
Latest reply on Sep 11, 2007 by VRFuser
Hi,


I have an ag34980a but I am not familiar with its DIO modules.
Now I find some grammatical errors in your commands.

1. Unnecessary blank
For example:
>CONFigure: DIGital:WIDTh WORD, (@2201)

"CONFigure:DIGital:WIDTh WORD,(@2201)"
for
"CONFigure: DIGital:WIDTh WORD, (@2201)"

2. Insufficient command
>TRACe:DATA:DIGital:WORD, (@2201)

According to a manual, this command needs name and values.
"TRACe[:DATA]:DIGital[:{BYTE|1|WORD|2|LWORd|4}] (@<channel>), <name>, {<binary _block>|<value>, <value> [,<value>, . . . ]}"

3.Unnecessary blank and comma
>TRAC: CAT?, (@2201)

TRAC:CAT? (@2201)
for
TRAC: CAT?, (@2201)


Regards,
FUKUI Yutaka

----- Original Message -----
>Subject: [vrf] 34980 commands
>Date: Fri, 7 Sep 2007 09:00:04 -0400
>From: "Noriega, Maria" <Maria.Noriega@analog.com>
>To: VRF <vrf@agilent.com>
>
>
>Hi vrf,
>
>I'm using Agilent's 34980, and I am trying to input some hex values
>using VEE.. So far this is what I've got for commands:
>CONFigure: DIGital:WIDTh WORD, (@2201)
>CONFigure: DIGital:DIRection OUTPUT, (@2201)
>CONFigure: DIGital:HANDshake:SYNChornous:STRobe:SOURce INTernal,
>(@2201)
>SOURce: DIGital:DRIVe ACTive, (@2201)
>SOURce: DIGital: LEVel 3, (@2201,2202)
>CONFigure: DIGital: POLarity NORMal, (@2201)
>CONFigure: DIGital: HANDshake: RATE 100000, (@2201)
>SOURce: DIGital: MEMory: NCYCles1, (@2201) TRACe:DATA:DIGital:WORD,
>(@2201) SOURce:DIGital:MEMory:TRACe INIT1, (@2201)
>CONFigure:DIGital:DIRection OUTPUT, (@2201)
>TRAC: CAT?, (@2201)
>I am getting an error and I still haven't figured out a way to have the
>34980 read back the values it has stored. Do any of you have any
>experience with this? I'm still trying to familiarize myself with this
>instrument. Any help is greatly appreciated.
>Thanks,
>
>Maria Gabriela Noriega
>Reliability Engineer
>Analog Devices, Inc
>804 Woburn Street
>Wilmington, MA 01887
>Phone (781)937-1821
>
>
>
>---
>You are currently subscribed to vrf as: fukui.yutaka@jp.fujitsu.com To
>subscribe please send an email to: "vrf-request@lists.it.agilent.com"
>with
the word subscribe in the message body.
>To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
>To send messages to this mailing list,  email "vrf@agilent.com". 
>If you need help with the mailing list send a message to
>"owner-vrf@it.lists.it.agilent.com".
>Search the "unofficial vrf archive" at
>"http://www.vrfarchive.com/vrf_archive
".
>Search the Agilent vrf archive at "http://vee.engineering.agilent.com".

== ? ===============================================================
FUJITSU ???(?)????[?9-433] ?????????
   ?????????·???????? ?     ??  ? (FUKUI Yutaka)
INTERNET E-Mail: fukui.yutaka@jp.fujitsu.com
TEL: 044-754-2238(ext:711-5-3153)     FAX: 044-754-2434(ext:711-5-3178)
== ? ===============================================================


---
You are currently subscribed to vrf as: hua_jing@agilent.com To subscribe please send an email to: "vrf-request@lists.it.agilent.com" with the word subscribe in the message body.
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list,  email "vrf@agilent.com". 
If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "http://www.vrfarchive.com/vrf_archive".
Search the Agilent vrf archive at "http://vee.engineering.agilent.com".

Outcomes