AnsweredAssumed Answered

vrf Instrument manager configuration issues.

Question asked by VRFuser on Mar 28, 2005
Latest reply on Mar 28, 2005 by VRFuser
Dave,

I have run into the same problem. I assumed it was because when cut & pasting Direct I/O, the I/O configuration doesn't follow, and in fact forces the pasted direct I/O box into it's current configuration.

So what I did was form a basic I/O base program with all possible direct I/O box configurations, and then copied & pasted other programs into this, making he necessary conections after. This is very inefficient and annoying, but I couldn' t find another way to do this. Furthermore, when I copied and pasted the program into my I/O base, the panel view of the pasted program didn't tag along, so I have to recreate my panel view.

If anybody knows a trick here, it would save me an enormous amount of time, because I need to outfit dozens of programs to operate in several labs, all with their own I/O configuration.

Chris


----- Original Message -----
From: Andersen Dave-P26278 <Dave.Andersen@gdc4s.com>
Date: Tuesday, March 29, 2005 1:49 pm
Subject: RE: [vrf] Instrument manager configuration issues.

>
> Dale
>
> I had run into a situation where the instrument manager would
> switch from embedded to default when doing something similar to
> what you are describing.  This was determined to be a bug and was
> turned into the defect list.  I am not sure if this was fixed in
> any fixes to Vee 6 or not.
>
> As for # 2, I don't know an easy way.
>
> Dave Andersen 
>
> -----Original Message-----
> From: Dale Hauck [dhauck@Anadigics.com]
> Sent: Tuesday, March 29, 2005 10:59 AM
> To: VRF
> Subject: [vrf] Instrument manager configuration issues.
>
>
> G'day all.
> Using Vee 6.0, I have two Programs/Instrument manager
> configurations for the
> same instruments. Please forgive me.
> When cut/paste'ing direct IO transactions from one program to the
> other, the
> instrument manager seems to also be overwritten...occasionally,
> HAH!
> 1. Explanation?
> 2. Is there a way to select all instrument calls in a program and
> renamethem, thus correcting my 'fox paw'?
>
> ---
> You are currently subscribed to vrf as: Dave.Andersen@gdc4s.com
> To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".
> To unsubscribe send a blank email to "leave-
> vrf@it.lists.it.agilent.com".To send messages to this mailing
> list,  email "vrf@agilent.com". 
> If you need help with the mailing list send a message to "owner-
> vrf@it.lists.it.agilent.com".
> ---
> You are currently subscribed to vrf as: chris.rodgers@senecac.on.ca
> To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".
> To unsubscribe send a blank email to "leave-
> vrf@it.lists.it.agilent.com".To send messages to this mailing
> list,  email "vrf@agilent.com". 
> If you need help with the mailing list send a message to "owner-
> vrf@it.lists.it.agilent.com".


---
You are currently subscribed to vrf as: rsb@soco.agilent.com
To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list,  email "vrf@agilent.com". 
If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com".

Outcomes