AnsweredAssumed Answered

vrf XP parallel port

Question asked by hgilsdorf on Sep 7, 2006

Like • Show 0 Likes0
Comment • 3

That fixed the error.

Thanks Dave,
-Henry

----- Forwarded by Henry Gilsdorf/Westell/EIT on 09/07/2006 03:46 PM -----

"Andersen, Dave-P26278" <Dave.Andersen@gdc4s.com>

09/07/2006 03:38 PM
Â Â Â Â
Â Â Â Â To: Â Â Â Â <hgilsdorf@westell.com>
Â Â Â Â cc: Â Â Â Â
Â Â Â Â Subject: Â Â Â Â RE: [vrf] XP parallel port

redefine your header using _stdcall. Â Vee uses _cdecl by default.
Â

int _stdcall Out32(int PortAddress,int Value);

int _stdcall Inp32(int PortAddress);

Â _____ Â

From: hgilsdorf@westell.com [mailto:hgilsdorf@westell.com]
Sent: Thursday, September 07, 2006 1:24 PM
To: VRF
Subject: [vrf] XP parallel port

Vrf's,

I might be having a problem with the definition file but not sure. The attached Vee program does write data to the parallel port but gives the error 739, stack pointer corrupted after return from compiled function.
Any help will be appreciated,
Thanks,
-Henry

--- You are currently subscribed to vrf as: Dave.Andersen@gdc4s.com To subscribe please send an email to: "vrf-request@lists.it.agilent.com" with the word subscribe in the message body. To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com". To send messages to this mailing list, email "vrf@agilent.com". If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com". Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".
--- To subscribe please send an email to: "vrf-request@lists.it.agilent.com" with the word subscribe in the message body. To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com". To send messages to this mailing list, email "vrf@agilent.com". If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com". Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".

No one else has this question

Outcomes

hgilsdorf Sep 7, 2006 12:23 AM

<div>Hi, i m newbie in VEE Pro, currently doing some testing using VEE Pro and instrument DDM (GW iNSTEK, GDM-8246).
Problem arise during resistance configuration, VEE Pro unable to return the function unit 'k' (kOHM), sometimes it appear and sometimes dont <img alt="Crying or Very sad" src="https://forums.tm.agilent.com/phpbb2/images/smiles/icon_cry.gif" border="0"> , e.g. 14.91k instead of 14.91
How am i get this problem resolve...</div><div>Appreciate for help.
</div><div>Regards, Jess</div>---You are currently subscribed to vrf as: rsb@soco.agilent.comTo subscribe please send an email to: "vrf-request@lists.it.agilent.com" with the word subscribe in the message body.To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".To send messages to this mailing list, email "vrf@agilent.com". If you need help with the mailing list send a message to"owner-vrf@it.lists.it.agilent.com".Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".

Actions

hgilsdorf Sep 7, 2006 12:47 AM

That fixed the error.

Thanks Dave,
-Henry

----- Forwarded by Henry Gilsdorf/Westell/EIT on 09/07/2006 03:46 PM -----
<table width=100%><tr valign=top><td><td>"Andersen, Dave-P26278" |Dave.Andersen@gdc4s.com>09/07/2006 03:38 PM
<td> 
 To: |hgilsdorf@westell.com>
 cc: 
 Subject: RE: [vrf] XP parallel port</table>

redefine your header using _stdcall. Vee uses _cdecl by default.
 int _stdcall Out32(int PortAddress,int Value);int _stdcall Inp32(int PortAddress);
<hr>From: hgilsdorf@westell.com [mailto:hgilsdorf@westell.com] 
Sent: Thursday, September 07, 2006 1:24 PM
To: VRF
Subject: [vrf] XP parallel port


Vrf's,

I might be having a problem with the definition file but not sure. The attached Vee program does write data to the parallel port but gives the error 739, stack pointer corrupted after return from compiled function. 
Any help will be appreciated, 
Thanks, 
-Henry

--- You are currently subscribed to vrf as: Dave.Andersen@gdc4s.com To subscribe please send an email to: "vrf-request@lists.it.agilent.com" with the word subscribe in the message body. To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com". To send messages to this mailing list, email "vrf@agilent.com". If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com". Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".
---You are currently subscribed to vrf as: rsb@soco.agilent.comTo subscribe please send an email to: "vrf-request@lists.it.agilent.com" with the word subscribe in the message body.To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".To send messages to this mailing list, email "vrf@agilent.com". If you need help with the mailing list send a message to"owner-vrf@it.lists.it.agilent.com".Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".

Actions

hgilsdorf Sep 7, 2006 1:27 PM

Â > Â As an example,Â Â the specification for a particular measurementÂ Â
> Â is >= 1.15 AND <= 1.25. Say the result is 1.25000069.Â Â Â
> Â This could be a failure in some interpretations but the spec only requires 1.25.Â Â
Â
You could bump the limit up to 1.2501 -- 2 digits beyond the spec, thus "invisible"
and this would let the internalÂ representation pass the spec.Â To get in even
tighter, figure out what one LSB is in whatever float32/64 you are using and add
that to your spec.
Â
Les Hammer
VP of Engineering
Smart Sensor Systems
720 14th Street SW
Loveland, CO.Â 80537-6349
Les.Hammer@SmartSensorSystems.com
Les.Hammer@CompleteTest.com

Â

---

To subscribe please send an email to: "vrf-request@lists.it.agilent.com" with the word subscribe in the message body.
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to
"owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".

Actions

3 Replies

hgilsdorf Sep 7, 2006 12:23 AM
Mark Correct
Correct Answer
<div>Hi, i m newbie in VEE Pro, currently doing some testing using VEE Pro and instrument DDM (GW iNSTEK, GDM-8246).
Problem arise during resistance configuration, VEE Pro unable to return the function unit 'k' (kOHM), sometimes it appear and sometimes dont <img alt="Crying or Very sad" src="https://forums.tm.agilent.com/phpbb2/images/smiles/icon_cry.gif" border="0"> , e.g. 14.91k instead of 14.91
How am i get this problem resolve...</div><div>Appreciate for help.
</div><div>Regards, Jess</div>---You are currently subscribed to vrf as: rsb@soco.agilent.comTo subscribe please send an email to: "vrf-request@lists.it.agilent.com" with the word subscribe in the message body.To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".To send messages to this mailing list, email "vrf@agilent.com". If you need help with the mailing list send a message to"owner-vrf@it.lists.it.agilent.com".Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".
Like • Show 0 Likes0
Actions
hgilsdorf Sep 7, 2006 12:47 AM
Mark Correct
Correct Answer

That fixed the error.

Thanks Dave,
-Henry

----- Forwarded by Henry Gilsdorf/Westell/EIT on 09/07/2006 03:46 PM -----
<table width=100%><tr valign=top><td><td>"Andersen, Dave-P26278" |Dave.Andersen@gdc4s.com>09/07/2006 03:38 PM
<td> 
 To: |hgilsdorf@westell.com>
 cc: 
 Subject: RE: [vrf] XP parallel port</table>

redefine your header using _stdcall. Vee uses _cdecl by default.
 int _stdcall Out32(int PortAddress,int Value);int _stdcall Inp32(int PortAddress);
<hr>From: hgilsdorf@westell.com [mailto:hgilsdorf@westell.com] 
Sent: Thursday, September 07, 2006 1:24 PM
To: VRF
Subject: [vrf] XP parallel port


Vrf's,

I might be having a problem with the definition file but not sure. The attached Vee program does write data to the parallel port but gives the error 739, stack pointer corrupted after return from compiled function. 
Any help will be appreciated, 
Thanks, 
-Henry

--- You are currently subscribed to vrf as: Dave.Andersen@gdc4s.com To subscribe please send an email to: "vrf-request@lists.it.agilent.com" with the word subscribe in the message body. To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com". To send messages to this mailing list, email "vrf@agilent.com". If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com". Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".
---You are currently subscribed to vrf as: rsb@soco.agilent.comTo subscribe please send an email to: "vrf-request@lists.it.agilent.com" with the word subscribe in the message body.To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".To send messages to this mailing list, email "vrf@agilent.com". If you need help with the mailing list send a message to"owner-vrf@it.lists.it.agilent.com".Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".
Like • Show 0 Likes0
Actions
hgilsdorf Sep 7, 2006 1:27 PM
Mark Correct
Correct Answer
Â > Â As an example,Â Â the specification for a particular measurementÂ Â
> Â is >= 1.15 AND <= 1.25. Say the result is 1.25000069.Â Â Â
> Â This could be a failure in some interpretations but the spec only requires 1.25.Â Â
Â
You could bump the limit up to 1.2501 -- 2 digits beyond the spec, thus "invisible"
and this would let the internalÂ representation pass the spec.Â To get in even
tighter, figure out what one LSB is in whatever float32/64 you are using and add
that to your spec.
Â
Les Hammer
VP of Engineering
Smart Sensor Systems
720 14th Street SW
Loveland, CO.Â 80537-6349
Les.Hammer@SmartSensorSystems.com
Les.Hammer@CompleteTest.com

Â

---

To subscribe please send an email to: "vrf-request@lists.it.agilent.com" with the word subscribe in the message body.
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to
"owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".
Like • Show 0 Likes0
Actions

vrf XP parallel port

Outcomes

Related Content

Recommended Content