Hello Brian,
I guess what you meant is the power meter of R&S --
If it is so, there are 5 modes to choose from, and I actually have sampled two of these -- the Tslot mode and Scope mode which are dependent on external triggering and measurement window.
The peak power readings are fairly comparable with other meter + sensor test solutions.
Regards,
Joanna V. Alim
New Product Introduction, System-in-a-Package Solutions (SiPS),
NXP Semiconductors
Philips Avenue, LISP1, Cabuyao, Laguna, Philippines 4025
e-mail: joanna.v.alim@nxp.com
"Bauer, Brian" <brian.bauer@rfsworld.com>
2006-10-04 01:10 AM
Please respond to
"Bauer, Brian" <brian.bauer@rfsworld.com>
To
VRF <vrf@agilent.com>
cc
Subject
[vrf] Rohde & Schwarz power sensor
Classification
Anyone measure peak power with a Rohde & Shwarz universal power supply before? It is an NRP-z11.. Thanks.
Brian Bauer
Test Engineer
Radio Frequency Systems
29 Research Parkway
Wallingford, CT 06492
P - 203-630-3311 X1760
F - 203-634-2179
---
You are currently subscribed to vrf as: joanna.v.alim@philips.com
To subscribe please send an email to: "vrf-request@lists.it.agilent.com" with the word subscribe in the message body.
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to
"owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".
--- To subscribe please send an email to: "vrf-request@lists.it.agilent.com" with the word subscribe in the message body. To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com". To send messages to this mailing list, email "vrf@agilent.com". If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com". Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".
Brian Bauer
Test Engineer
Radio Frequency Systems
29 Research Parkway
Wallingford, CT 06492
P - 203-630-3311 X1760
F - 203-634-2179
---
To subscribe please send an email to: "vrf-request@lists.it.agilent.com" with the word subscribe in the message body.
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to
"owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".
<font size=2 face="sans-serif">Hello Brian,</font>
<font size=2 face="sans-serif">I guess what you meant is the powermeter of R&S --</font>
<font size=2 face="sans-serif">If it is so, there are 5 modes to choosefrom, and I actually have sampled two of these -- the Tslot mode and Scopemode which are dependent on external triggering and measurement window.</font>
<font size=2 face="sans-serif">The peak power readings are fairly comparablewith other meter + sensor test solutions.</font>
<font size=2 face="sans-serif">Regards,</font>
<font size=2 face="sans-serif">
Joanna V. Alim
New Product Introduction, System-in-a-Package Solutions (SiPS),
NXP Semiconductors
Philips Avenue, LISP1, Cabuyao, Laguna, Philippines 4025
e-mail: joanna.v.alim@nxp.com</font>
<table width=100%><tr valign=top><td width=33%>
<font size=1 face="sans-serif"><b>"Bauer, Brian" |brian.bauer@rfsworld.com></b></font><p><font size=1 face="sans-serif">2006-10-04 01:10 AM</font><table border><tr valign=top><td bgcolor=white><div align=center><font size=1 face="sans-serif">Please respond to
"Bauer, Brian" |brian.bauer@rfsworld.com></font></div></table>
<td width=66%><table width=100%><tr valign=top><td><div align=right><font size=1 face="sans-serif">To</font></div><td><font size=1 face="sans-serif">VRF |vrf@agilent.com></font><tr valign=top><td><div align=right><font size=1 face="sans-serif">cc</font></div><td><tr valign=top><td><div align=right><font size=1 face="sans-serif">Subject</font></div><td><font size=1 face="sans-serif">[vrf] Rohde & Schwarz power sensor</font><tr><td><div align=right><font size=1 face="sans-serif">Classification</font></div><td></table>
<table><tr valign=top><td><td></table><div align=right>
</div></table>
<font size=2 face="Arial">Anyone measure peak power with a Rohde &Shwarz universal power supply before? It is an NRP-z11.. Thanks.</font><font size=3></font><p><font size=2 face="Arial"><b>Brian Bauer</b></font><font size=3> </font><font size=2 face="Arial">
Test Engineer</font><font size=3> </font><font size=2 face="Arial">
Radio Frequency Systems</font><font size=3> </font><font size=2 face="Arial">
29 Research Parkway</font><font size=3> </font><font size=2 face="Arial">
Wallingford, CT 06492</font><font size=3> </font><p><font size=2 face="Arial">P - 203-630-3311 X1760</font><font size=3></font><font size=2 face="Arial">
F - 203-634-2179</font><font size=3> </font><p><font size=3>
---
You are currently subscribed to vrf as: joanna.v.alim@philips.com
To subscribe please send an email to: "vrf-request@lists.it.agilent.com"with the word subscribe in the message body.
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to
"owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".</font><p>---You are currently subscribed to vrf as: rsb@soco.agilent.comTo subscribe please send an email to: "vrf-request@lists.it.agilent.com" with the word subscribe in the message body.To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".To send messages to this mailing list, email "vrf@agilent.com". If you need help with the mailing list send a message to"owner-vrf@it.lists.it.agilent.com".Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".