AnsweredAssumed Answered

vrf Vee execution rule problems and OK buttons

Question asked by VRFuser on Jan 21, 2003
Sorry Mike,

I should have responded to the forum. Didn't want to smatter the board with
my website.

I actually responded yesterday to Yoeri and told him that he could download
the runtime from my site as we still write all of our programs in HPVEE 5
and distribute the runtime software via our website. The only kicker is you
only need to run it from Disk 1-1 and not Disk 1. We have customized it a
bit to fit our company and the calibration software.

If anyone else needs it, they can find it at http://www.veecal.com/dl.htm

Click on the VeeCal icon and wa-la, Runtime 5 in a jiffy.

Also, while I am on the subject, a couple of days ago another person wrote
in asking about security dongles. I also responded in private to them about
our company's dongles that we distribute with the software. The name of the
company is KeyLok out of Colorado. I love working with them and find them
to be a real stand up company.

Guess I should have put this up on the VRF.

Have a good one, Mike

> Yoeri,
>
> I didn't see a response to your question, so maybe I'll give it a try.
> The VEE 6 run-time is designed to run VEE 5 programs without problems.
> You might want to download this and give it a try. I have a feeling it
> will work just fine for you. If not, could you please respond again to
> the VRF group and let us know what went wrong? That kind of information
> is very helpful.
>
> If the VEE 6 RunTime somehow fails to work properly for you, I'm sure
> we can find someone with an old VEE 5 CD that can extract the RunTime
> setup files off of it for you. Yes, you really should to do an
> "install" for the registry and paths to be set up properly. Otherwise
> VEE RunTime wont work properly. (Unless you know how to copy the
> settings from another PC.)
>
> Cheers!
> Mike Groves
>
> -----Original Message-----
> From: Y. Arien [mailto:y.arien@emerson-cuming-mip.com]
> Sent: Monday, January 20, 2003 7:08 AM
> To: VEE vrf
> Subject: [vrf] Runtime Version for Vee 5
>
>
> Hello
>
> I have lost my CD with Vee 5 and his Runtime version. I checked on the
> ADN website for this runtime but they only seem to have version 6 and
> all my software is written in version 5.
> Can somebody help me? Can I just copy the files from another PC are do
> I need the setup?
>
> Lots of thanks in advance
>
> Greetings
>
>
> Yoeri
>
> Yoeri Arien
> Microwave engineer
> Emerson & Cuming MWP
> Nijverheidstraat 7a
> 2260 Westerlo
> Belgium
> (Phone) +32 14562547
> (Fax) +32 14562507
>
>
>
> ---
> You are currently subscribed to vrf as: mikegroves@pacbell.net
> To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".
> To unsubscribe send a blank email to
> "leave-vrf@it.lists.it.agilent.com". To send messages to this mailing
> list,  email "vrf@it.lists.it.agilent.com". If you need help with the
> mailing list send a message to
> "owner-vrf@it.lists.it.agilent.com".
>
>
> ---
> You are currently subscribed to vrf as: sales@veecal.com
> To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".
> To unsubscribe send a blank email to
> "leave-vrf@it.lists.it.agilent.com". To send messages to this mailing
> list,  email "vrf@it.lists.it.agilent.com".   If you need help with the
> mailing list send a message to "owner-vrf@it.lists.it.agilent.com".


--
The affordable alternative to high priced metrology software. www.veecal.com


---
You are currently subscribed to vrf as: rsb@soco.agilent.com
To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list,  email "vrf@it.lists.it.agilent.com". 
If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com".

Outcomes