AnsweredAssumed Answered

vrf VEE and PCI

Question asked by VRFuser on Apr 21, 2006

Like • Show 0 Likes0
Comment • 9

Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".

No one else has this question

Outcomes

9 Replies

tdaniels Apr 18, 2006 11:20 PM
Mark Correct
Correct Answer

I am trying to use VEE 7.0 with a Pickering 50-513-021 PCI Switch and a NI
4070 PCI DMM. Can someone help me in getting VEE to identify these cards?
I have never used VEE with a card on the PCI bus, other than a PCI to GPIB
interface. Sample code would be appreciated, if available.

Best Regards,

Tom Daniels
Sr. Test Engineer
The Morey Corporation
100 Morey Drive
Woodridge, IL 60517
T: (630) 754-2256
F: (630) 754-2656
tdaniels@moreycorp.com

This e-mail, including attachments, may contain information that is confidential and/or proprietary, and may only be used by the person to whom this email is addressed. If the recipient of this e-mail is not the intended recipient or an authorized agent, the reader is hereby notified that any dissemination, distribution, or copying of this e-mail is prohibited. If this e-mail has been delivered to you in error, please notify the sender by replying to this message and deleting this e-mail immediately.
---
You are currently subscribed to vrf as: rsb@soco.agilent.com
To subscribe please send an email to: "vrf-request@lists.it.agilent.com" with the word subscribe in the message body.
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to
"owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".
Like • Show 0 Likes0
Actions
willie.kiely Apr 19, 2006 9:02 AM
Mark Correct
Correct Answer
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1"><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN"><HTML><HEAD><META NAME="Generator" CONTENT="MS Exchange Server version 6.5.7226.0"><TITLE>[vrf] VEE and PCI</TITLE></HEAD><BODY><DIV id=idOWAReplyText4116 dir=ltr><DIV dir=ltr>The GPIB PCI card is picked up by the AgilentIO library, which VEE relates to, but generally, any other PCI card is not.</DIV><DIV dir=ltr> </DIV><DIV dir=ltr>Each card should have a DLL associated with them, although I am not familiar with them.</DIV><DIV dir=ltr> </DIV><DIV dir=ltr>Usually NI will have a DAQ.dll, or DAQmx.dll that can be imported into VEE once you've converted the .h file correctly. </DIV><DIV dir=ltr> </DIV><DIV dir=ltr>If the 4070 is a recent card, use MAX to setup a task, and then DAQmx.dll can be used to work the card.</DIV><DIV dir=ltr> </DIV><DIV dir=ltr>Regards,</DIV></DIV><DIV dir=ltr> <HR tabIndex=-1>From: TDaniels@moreycorp.com [mailto:TDaniels@moreycorp.com] Sent: Wed 4/19/2006 8:20 PM To: VRF Subject: [vrf] VEE and PCI </DIV><DIV> I am trying to use VEE 7.0 with a Pickering 50-513-021 PCI Switch and a NI 4070 PCI DMM. Can someone help me in getting VEE to identify these cards? I have never used VEE with a card on the PCI bus, other than a PCI to GPIB interface. Sample code would be appreciated, if available. Best Regards, Tom Daniels Sr. Test Engineer The Morey Corporation 100 Morey Drive Woodridge, IL 60517 T: (630) 754-2256 F: (630) 754-2656 tdaniels@moreycorp.com This e-mail, including attachments, may contain information that is confidential and/or proprietary, and may only be used by the person to whom this email is addressed. If the recipient of this e-mail is not the intended recipient or an authorized agent, the reader is hereby notified that any dissemination, distribution, or copying of this e-mail is prohibited. If this e-mail has been delivered to you in error, please notify the sender by replying to this message and deleting this e-mail immediately. --- You are currently subscribed to vrf as: Willie.Kiely@bourns.com To subscribe please send an email to: "vrf-request@lists.it.agilent.com" with the word subscribe in the message body. To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com". To send messages to this mailing list, email "vrf@agilent.com". If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com". Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/". </DIV> --- You are currently subscribed to vrf as: rsb@soco.agilent.com To subscribe please send an email to: "vrf-request@lists.it.agilent.com" with the word subscribe in the message body. To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com". To send messages to this mailing list, email "vrf@agilent.com". If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com". Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".</BODY></HTML>
Like • Show 0 Likes0
Actions
tdaniels Apr 19, 2006 3:36 PM
Mark Correct
Correct Answer

I am trying to use VEE 7.0 with a Pickering 50-513-021 PCI Switch and a NI 4070 PCI DMM. Can someone help me in getting VEE to identify these cards?
I have never used VEE with a card on the PCI bus, other than a PCI to GPIB interface. Sample code would be appreciated, if available.

Best Regards,

Tom Daniels
Sr. Test Engineer
The Morey Corporation
100 Morey Drive
Woodridge, IL 60517
T: (630) 754-2256
F: (630) 754-2656
tdaniels@moreycorp.com

This e-mail, including attachments, may contain information that is confidential and/or proprietary, and may only be used by the person to whom this email is addressed. If the recipient of this e-mail is not the intended recipient or an authorized agent, the reader is hereby notified that any dissemination, distribution, or copying of this e-mail is prohibited. If this e-mail has been delivered to you in error, please notify the sender by replying to this message and deleting this e-mail immediately.
---
To subscribe please send an email to: "vrf-request@lists.it.agilent.com" with the word subscribe in the message body.
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".
Like • Show 0 Likes0
Actions
VRFuser Apr 19, 2006 4:05 PM
Mark Correct
Correct Answer
The GPIB PCI card is picked up by the AgilentIO library, which VEEÂ relates to, but generally, any other PCI card is not.
Â
Each card should haveÂ a DLL associated with them, although I am not familiar with them.
Â
UsuallyÂ NI will have a DAQ.dll, or DAQmx.dll that can be imported into VEE once you've converted the .h file correctly.
Â
If the 4070 is a recent card, use MAX to setup a task, and then DAQmx.dll can be used to work the card.
Â
Regards,

Â _____ Â

From: TDaniels@moreycorp.com [mailto:TDaniels@moreycorp.com]
Sent: Wed 4/19/2006 8:20 PM
To: VRF
Subject: [vrf] VEE and PCI

I am trying to use VEE 7.0 with a Pickering 50-513-021 PCI Switch and a NI
4070 PCI DMM.Â Can someone help me in getting VEE to identify these cards?
I have never used VEE with a card on the PCI bus, other than a PCI to GPIB
interface.Â Sample code would be appreciated, if available.

Best Regards,

Tom Daniels
Sr. Test Engineer
The Morey Corporation
100 Morey Drive
Woodridge, IL 60517
T: (630) 754-2256
F: (630) 754-2656
tdaniels@moreycorp.com

This e-mail, including attachments, may contain information that is confidential and/or proprietary, and may only be used by the person to whom this email is addressed. If the recipient of this e-mail is not the intended recipient or an authorized agent, the reader is hereby notified that any dissemination, distribution, or copying of this e-mail is prohibited. If this e-mail has been delivered to you in error, please notify the sender by replying to this message and deleting this e-mail immediately.Â Â
---
You are currently subscribed to vrf as: Willie.Kiely@bourns.com
To subscribe please send an email to: "vrf-request@lists.it.agilent.com" with the word subscribe in the message body.
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list,Â email "vrf@agilent.com".Â
If you need help with the mailing list send a message to
"owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".

---

To subscribe please send an email to: "vrf-request@lists.it.agilent.com" with the word subscribe in the message body.
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to
"owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".
Like • Show 0 Likes0
Actions
brian_vee Apr 19, 2006 5:44 PM
Mark Correct
Correct Answer
For the 4070 DMM, I would consider upgrading to VEE 7.5. The
Agilent folks did a good job of making the NI modular instruments
easier to use in that version--it shows up in the Instrument Manager
like any other DMM. You can also get to the NI-DMM API and examples
from the Instrument Manager.
If you can upgrade, I think you will find this a lot easier
than trying to program the 4070 through the DAQmx DLL.

Brian Powell
LabVIEW R&D
brian@ni.com

<TDaniels@moreycorp.com> wrote...
>I am trying to use VEE 7.0 with a Pickering 50-513-021 PCI Switch and a NI
>4070 PCI DMM. Can someone help me in getting VEE to identify these cards?
>I have never used VEE with a card on the PCI bus, other than a PCI to GPIB
>interface. Sample code would be appreciated, if available.

---
You are currently subscribed to vrf as: rsb@soco.agilent.com
To subscribe please send an email to: "vrf-request@lists.it.agilent.com" with the word subscribe in the message body.
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to
"owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".
Like • Show 0 Likes0
Actions
tdaniels Apr 19, 2006 9:02 PM
Mark Correct
Correct Answer

> "Brian H. Powell" <brian@ni.com>
>For the 4070 DMM, I would consider upgrading to VEE 7.5. The
>Agilent folks did a good job of making the NI modular instruments
>easier to use in that version--it shows up in the Instrument Manager
>like any other DMM.

Thanks Brian.

I have been thinking about upgrading, and wondered if anyone had used that
feature of 7.5 with the NI DMM. If I can get the Pickering card to work in
VEE, I will probably upgrade for that reason. Have you tried VEE 7.5
specifically with the PCI version of the 4070 DMM? That is what I am
using.

I was using LabView 8 for this project, but had some issues getting
reliable operation with the Pickering card. NI and Pickering have not been
able to help yet, and I need to move on to other things soon. Hopefully
VEE will work with the input Shawn provided.

,Tom

This e-mail, including attachments, may contain information that is confidential and/or proprietary, and may only be used by the person to whom this email is addressed. If the recipient of this e-mail is not the intended recipient or an authorized agent, the reader is hereby notified that any dissemination, distribution, or copying of this e-mail is prohibited. If this e-mail has been delivered to you in error, please notify the sender by replying to this message and deleting this e-mail immediately.
---
You are currently subscribed to vrf as: rsb@soco.agilent.com
To subscribe please send an email to: "vrf-request@lists.it.agilent.com" with the word subscribe in the message body.
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to
"owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".
Like • Show 0 Likes0
Actions
VRFuser Apr 20, 2006 9:27 AM
Mark Correct
Correct Answer
For the 4070 DMM, I would consider upgrading to VEE 7.5. The Agilent folks did a good job of making the NI modular instruments easier to use in that version--it shows up in the Instrument Manager like any other DMM. You can also get to the NI-DMM API and examples from the Instrument Manager.
If you can upgrade, I think you will find this a lot easier than trying to program the 4070 through the DAQmx DLL.

Brian Powell
LabVIEW R&D
brian@ni.com

<TDaniels@moreycorp.com> wrote...
>I am trying to use VEE 7.0 with a Pickering 50-513-021 PCI Switch and a
>NI 4070 PCI DMM. Can someone help me in getting VEE to identify these cards?
>I have never used VEE with a card on the PCI bus, other than a PCI to
>GPIB interface. Sample code would be appreciated, if available.

---
To subscribe please send an email to: "vrf-request@lists.it.agilent.com" with the word subscribe in the message body.
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".
Like • Show 0 Likes0
Actions
tdaniels Apr 20, 2006 10:41 AM
Mark Correct
Correct Answer

> "Brian H. Powell" <brian@ni.com>
>For the 4070 DMM, I would consider upgrading to VEE 7.5. The Agilent
>folks did a good job of making the NI modular instruments easier to use
>in that version--it shows up in the Instrument Manager like any other
>DMM.

Thanks Brian.

I have been thinking about upgrading, and wondered if anyone had used that feature of 7.5 with the NI DMM. If I can get the Pickering card to work in VEE, I will probably upgrade for that reason. Have you tried VEE 7.5 specifically with the PCI version of the 4070 DMM? That is what I am using.

I was using LabView 8 for this project, but had some issues getting reliable operation with the Pickering card. NI and Pickering have not been able to help yet, and I need to move on to other things soon. Hopefully VEE will work with the input Shawn provided.

,Tom

This e-mail, including attachments, may contain information that is confidential and/or proprietary, and may only be used by the person to whom this email is addressed. If the recipient of this e-mail is not the intended recipient or an authorized agent, the reader is hereby notified that any dissemination, distribution, or copying of this e-mail is prohibited. If this e-mail has been delivered to you in error, please notify the sender by replying to this message and deleting this e-mail immediately.
---
To subscribe please send an email to: "vrf-request@lists.it.agilent.com" with the word subscribe in the message body.
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".
Like • Show 0 Likes0
Actions
willie.kiely Apr 20, 2006 5:49 PM
Mark Correct
Correct Answer
<html xmlns:o="urn:schemas-microsoft-com:office:office" xmlns:w="urn:schemas-microsoft-com:office:word" xmlns:st1="urn:schemas-microsoft-com:office:smarttags" xmlns="http://www.w3.org/TR/REC-html40"><head><meta http-equiv=Content-Type content="text/html; charset=iso-8859-1"><meta name=Generator content="Microsoft Word 11 (filtered medium)"><o:SmartTagType namespaceuri="urn:schemas-microsoft-com:office:smarttags" name="City"/><o:SmartTagType namespaceuri="urn:schemas-microsoft-com:office:smarttags" name="place" downloadurl="http://www.5iantlavalamp.com/"/><style></style></head><body lang=EN-US link=blue vlink=purple><div class=Section1>Hi VEE Users,<o:p></o:p><o:p> </o:p>Don’t miss out on the VEE Days 2006 event inGermany! Join us in celebrating 15 years of HP VEE/Agilent VEE.<o:p></o:p><o:p> </o:p>VEE Days Germany will be held on 26April, 2006, near <st1:Cityw:st="on"><st1:place w:st="on">Munich</st1:place></st1:City>. As usual, expectmany interesting topics, lectures, and discussions. View the Topic list belowto see just what will be covered.<o:p></o:p><o:p> </o:p>Participation is free but you must register to secureyour spot. Visit <a href="http://www.veesion.de/"><spanstyle='color:windowtext'>www.VEEsion.de</a> to register and getmore information about the event.<o:p></o:p><o:p> </o:p>Regards,<o:p></o:p>Nicole<o:p></o:p><o:p> </o:p>VEE Days Germany 2006 Topics<o:p></o:p><ul style='margin-top:0in' type=disc> <li class=MsoNormal style='mso-list:l0 level1 lfo1'><a name=agenda></a>What's new in VEE Pro 7.5?
 - Excel support
 - IVI-COM driver support
 - .NET support <o:p></o:p></li> <li class=MsoNormal style='mso-list:l0 level1 lfo1'>Connectivity solutions, advantages and drawbacks: GPIB, LAN, USB, Converters, Agilent IO Libraries Suite 14.1 <o:p></o:p></li> <li class=MsoNormal style='mso-list:l0 level1 lfo1'>MEphisto Scope, der robuste Begleiter fr den tglichen Einsatz, einfach in VEE Pro programmieren.
 Dietmar Sperling, Meilhaus Electronic <o:p></o:p></li> <li class=MsoNormal style='mso-list:l0 level1 lfo1'>Controller MSP430 in VEE Pro programmieren und Controler Funktionen in VEE Pro testen.
 Herbert Schwarz, TEXAS Instruments <o:p></o:p></li> <li class=MsoNormal style='mso-list:l0 level1 lfo1'>Embedded Controller mit ME-4680 zum Test von elektrischen und elektronischen Komponenten der Fahrzeugindustrie auf Basis von VEE Pro.
 Dipl.-Ing. Ren Franz, ENZ Ingenieurbro fr Umweltelektronik & Automatisierung <o:p></o:p></li> <li class=MsoNormal style='mso-list:l0 level1 lfo1'>Accelerating system setup with LXI - future of test <o:p></o:p></li> <li class=MsoNormal style='mso-list:l0 level1 lfo1'>VEE instrument programming examples incl. tips and tricks
 - VEE IO usage
 - Menu files
 - Using the MATLAB Script Engine in VEE
 - Accessing the power of .NET<o:p></o:p></li></ul></div> --- You are currently subscribed to vrf as: rsb@soco.agilent.com To subscribe please send an email to: "vrf-request@lists.it.agilent.com" with the word subscribe in the message body. To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com". To send messages to this mailing list, email "vrf@agilent.com". If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com". Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".</BODY></html>
Like • Show 0 Likes0
Actions

vrf VEE and PCI

Outcomes

Related Content

Recommended Content