Ron,
Â
Sorry, I should’ve opened the attachment before responding. Try adding a little delay time after the “Execute Reset†before executing the next statement.
Â
Clif
Â
-----Original Message-----
From: Ron Pratt [mailto:RPratt@symmetricom.com]
Sent: Sunday, November 05, 2006 1:22 PM
To: VRF
Subject: [vrf] Serial port error
Â
Every once in a while I would receive the attached serial port timout error complaining that the buffer size cannot be set to 4096. I am not trying to set buffer size and in the latest occurance of theis the error occurs on a serial reset. Sometime rebooting the system clears the error, sometimes erasing the object and re entering it clears the error.
Â
Anyone else see this happening? Any ideas about how to fix?
Â
Ron Pratt
Test Engineer
Symmetricom
2300 Orchard Pkwy
San Jose CA 95131-1012
(408) 428 7872
Â
---
You are currently subscribed to vrf as: cdrew@wherenet.com
To subscribe please send an email to: "vrf-request@lists.it.agilent.com" with the word subscribe in the message body.
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to
"owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".
---
To subscribe please send an email to: "vrf-request@lists.it.agilent.com" with the word subscribe in the message body.
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to
"owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".
Â
Sorry, I should’ve opened the attachment before responding. Try adding a little delay time after the “Execute Reset†before executing the next statement.
Â
Clif
Â
-----Original Message-----
From: Ron Pratt [mailto:RPratt@symmetricom.com]
Sent: Sunday, November 05, 2006 1:22 PM
To: VRF
Subject: [vrf] Serial port error
Â
Every once in a while I would receive the attached serial port timout error complaining that the buffer size cannot be set to 4096. I am not trying to set buffer size and in the latest occurance of theis the error occurs on a serial reset. Sometime rebooting the system clears the error, sometimes erasing the object and re entering it clears the error.
Â
Anyone else see this happening? Any ideas about how to fix?
Â
Ron Pratt
Test Engineer
Symmetricom
2300 Orchard Pkwy
San Jose CA 95131-1012
(408) 428 7872
Â
---
You are currently subscribed to vrf as: cdrew@wherenet.com
To subscribe please send an email to: "vrf-request@lists.it.agilent.com" with the word subscribe in the message body.
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to
"owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".
---
To subscribe please send an email to: "vrf-request@lists.it.agilent.com" with the word subscribe in the message body.
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to
"owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".
Â
Reiner
 _____ Â
From: Ron Pratt [mailto:RPratt@symmetricom.com]
Sent: Sunday, November 05, 2006 4:22 PM
To: VRF
Subject: [vrf] Serial port error
Every once in a while I would receive the attached serial port timout error complaining that the buffer size cannot be set to 4096. I am not trying to set buffer size and in the latest occurance of theis the error occurs on a serial reset. Sometime rebooting the system clears the error, sometimes erasing the object and re entering it clears the error.
Â
Anyone else see this happening? Any ideas about how to fix?
Â
Ron Pratt
Test Engineer
Symmetricom
2300 Orchard Pkwy
San Jose CA 95131-1012
(408) 428 7872
Â
---
You are currently subscribed to vrf as: reiner.schlieker@siemens.com
To subscribe please send an email to: "vrf-request@lists.it.agilent.com" with the word subscribe in the message body.
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to
"owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".
---
To subscribe please send an email to: "vrf-request@lists.it.agilent.com" with the word subscribe in the message body.
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to
"owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".
Â
Resetting the Serial Port before each use clears the buffer. This may help…
Â
Clif
Â
-----Original Message-----
From: Ron Pratt [mailto:RPratt@symmetricom.com]
Sent: Sunday, November 05, 2006 1:22 PM
To: VRF
Subject: [vrf] Serial port error
Â
Every once in a while I would receive the attached serial port timout error complaining that the buffer size cannot be set to 4096. I am not trying to set buffer size and in the latest occurance of theis the error occurs on a serial reset. Sometime rebooting the system clears the error, sometimes erasing the object and re entering it clears the error.
Â
Anyone else see this happening? Any ideas about how to fix?
Â
Ron Pratt
Test Engineer
Symmetricom
2300 Orchard Pkwy
San Jose CA 95131-1012
(408) 428 7872
Â
---
You are currently subscribed to vrf as: cdrew@wherenet.com
To subscribe please send an email to: "vrf-request@lists.it.agilent.com" with the word subscribe in the message body.
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to
"owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".
---
To subscribe please send an email to: "vrf-request@lists.it.agilent.com" with the word subscribe in the message body.
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to
"owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".