AnsweredAssumed Answered

vrf Date and Time entry in VEE

Question asked by bill.ossmann on Oct 29, 2002
Hal,

Can you just use a VEE List Box loaded with the available times?

--
Bill Ossmann
Philips Ultrasound
e-mail:  bill.ossmann@philips.com




                      "Cornelius, Hal
                      (RPI)"                         To:  "VEE vrf" <vrf@it.lists.it.agilent.com>
                      <CorneliusHE@navai             cc:  (bcc: Bill Ossmann/ANR/MS/PHILIPS)
                      r.navy.mil>                    Subject:   [vrf] RE: Date and Time entry in VEE

                      10/29/2002 05:23               Classification:
                      PM
                      Please respond to
                      "Cornelius, Hal
                      (RPI)"






After selection of the date I would like for them to select the start time
of the test.  If possible I would like half hour increments in the time.

Hal Cornelius
Titan Systems
Operations Analysis and Training Group.
China Lake, Ca.
760/939-9008
760-939-2331 (Fax)

> -----Original Message-----
> From:            Davis, Jeff [SMTP:jeff.davis@cdi-es.com]
> Sent:            Tuesday, October 29, 2002 2:06 PM
> To:        'Cornelius, Hal (RPI)'
> Subject:         RE: [vrf] Date and Time entry in VEE
>
> There are a LOT of ways to do this -- do you want to get the hours
> DIRECTLY
> after your customer picks the DATE ? Do you want them to be able to get
> the
> hours anytime during execution, or just after they pick the date ?
>
> let me know and I will send you an example based upon your actual
> requirements.
>
> Jeff Davis
> Embedded Systems - CDI Technical Services
> 3137 E Elwood # 160
> Phoenix, Arizona 85034
> Phone: (602)431-4497 (x226)
> Cell: (480)330-1431
> Fax: (602)431-4435
>
> > -----Original Message-----
> > From: Cornelius, Hal (RPI) [mailto:CorneliusHE@navair.navy.mil]
> > Sent: Tuesday, October 29, 2002 14:27
> > To: VEE vrf
> > Subject: [vrf] Date and Time entry in VEE
> >
> >
> > I have a project where my customer has to determine which
> > test to run, the
> > start day, time and length of time to run the test.  I am
> > looking for a way
> > to present the a calendar to the customer so they can select
> > the month and
> > day to start the test.  I can get the date using the AX
> > MonthView control.
> > I have not figured out how to present an hourly schedule once
> > the date is
> > selected.  Has anyone have any ideas on how to do this in VEE?
> >
> > As you can tell this program will be running continuously.
> > Are there any
> > gotcha's I should look for?
> >
> > Hal Cornelius
> > Titan Systems
> > Operations Analysis and Training Group.
> > China Lake, Ca.
> > 760/939-9008
> > 760-939-2331 (Fax)
> >
> >
> > ---
> > You are currently subscribed to vrf as: jeff.davis@cdi-es.com
> > To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".
> > To unsubscribe send a blank email to
> > "leave-vrf@it.lists.it.agilent.com".
> > To send messages to this mailing list,  email
> > "vrf@it.lists.it.agilent.com".
> > If you need help with the mailing list send a message to
> > "owner-vrf@it.lists.it.agilent.com".
> >
> > _____________________________________________________________________
> > This e-mail has been scanned for viruses by the WorldCom
> > Internet Managed Scanning Service - powered by MessageLabs.
> > For further information visit http://www.worldcom.com
> >
>
> _____________________________________________________________________
> This e-mail has been scanned for viruses by the WorldCom Internet Managed
> Scanning Service - powered by MessageLabs. For further information visit
> http://www.worldcom.com

---
You are currently subscribed to vrf as: bill.ossmann@philips.com
To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list,  email "vrf@it.lists.it.agilent.com".
If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com".





---
You are currently subscribed to vrf as: rsb@soco.agilent.com
To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list,  email "vrf@it.lists.it.agilent.com". 
If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com".

Outcomes