AnsweredAssumed Answered

vrf Laptop PCMCIA WiFi & Agilent VEE

Question asked by VRFuser on Oct 7, 2002
Shouldn't your existing process be unaffected by the underlying protocols ?
If your PC's are connected via NIC's, the fact that they are truly connected
by 802.11 versus 802.3 [for standard CATx ethernet cables] should be
completely transparent to your program.

I do not think that you have to do anything special at all. Give it a shot
:)

Jeff Davis
Embedded Systems - CDI Technical Services
3137 E Elwood # 160
Phoenix, Arizona 85034
Phone: (602)431-4497 (x226)
Cell: (480)330-1431
Fax: (602)431-4435

> -----Original Message-----
> From: Michael J. Sullivan [mailto:michaelj_sullivan@raytheon.com]
> Sent: Monday, October 07, 2002 13:09
> To: VEE vrf
> Subject: [vrf] Laptop PCMCIA WiFi & Agilent VEE
>
>
> Hello All,
>
> One of our  RF Engineer presented me with this problem:
> He needs to control 2 pieces of HP Test Equipment with
> a Laptop over a WiFi connection. The setup:
>
> HP8664A Signal Generator
> HP8645A Agile Signal Generator
> Connected to:
>
> HP E2050A Lan/HP-IB Gateway
> Connected to:
>
> Linksys BEFW11S4 V2 Wireless AP + Cable/DSL Router
> Wireless Communication to:
>
> Compaq Pentium III 850Mhz Laptop
> Windows 2000 Professional (SP2)
> Agilent VEE 6.01 / L.02.01.00 Libraries
> with:
> Lucent Technologies-Orinoco Gold
> PC24E-H-FC WiFi PCMCIA Card (11 MBit/s)
>
> We have previously generated VEE code communicating from a
> PC(w/NIC) over our test network to a PC(w/NIC) controlling a
> HP E5503A Phase Noise Measurement System.
>
> Any suggestions on how to this with the above WiFi setup?
>
> Thanks, Mike
>
>
> ---
> You are currently subscribed to vrf as: jeff.davis@cdi-es.com
> To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".
> To unsubscribe send a blank email to
> "leave-vrf@it.lists.it.agilent.com".
> To send messages to this mailing list,  email
> "vrf@it.lists.it.agilent.com".
> If you need help with the mailing list send a message to
> "owner-vrf@it.lists.it.agilent.com".
>
> _____________________________________________________________________
> This e-mail has been scanned for viruses by the WorldCom
> Internet Managed Scanning Service - powered by MessageLabs.
> For further information visit http://www.worldcom.com
>

_____________________________________________________________________
This e-mail has been scanned for viruses by the WorldCom Internet Managed Scanning Service - powered by MessageLabs. For further information visit http://www.worldcom.com

---
You are currently subscribed to vrf as: rsb@soco.agilent.com
To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list,  email "vrf@it.lists.it.agilent.com". 
If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com".

Outcomes