AnsweredAssumed Answered

vrf Changeing com ports.

Question asked by michael.asbery on Apr 8, 2002
Anders,

The only way to do this is to change devices on the fly.

First create several serial devices configured with the correct baud rate:

Dev1: Com1_2400
Dev2: Com1_4800
Dev3: Com1_9600

Then add a Direct I/O object for any of the above devices with a control
input pin : DeviceName.

When you programmatically change the input to this pin between
Com1_2400,Com1_4800,Com1_9600 - the transactions in this object will be sent
to the device at the correct speed.

Hope this helps,

Mike Asbery

-----Original Message-----
From: owner-vrf@lvld.agilent.com [mailto:owner-vrf@lvld.agilent.com]On
Behalf Of Anders Jensen
Sent: Tuesday, April 09, 2002 1:41 AM
To: vrf@lvld.agilent.com
Subject: vrf Changeing com ports.


Hello all...
Does any one know how to change com port setting by HPVee its self ?
I mean, my program has to change the eg. baud rate ?





Yours Sincerely
NEG Micon Control Systems A/S

Anders Jensen
Design Engineer
Development Electronic Hardware

Italiensvej 1 - 5
DK-8450 Hammel
Denmark

Tel: +45 8762 2600
Fax: +45 8762 2601
Direct: +45 8762 2616
Cellular: +45 2060 5916
E-mail: abj@control-systems.com

---------------------------------------------------------------------
This is the "vrf" maillist, managed by Majordomo.  To send messages to
this maillist, just email to "vrf@lvld.agilent.com".  Subscriptions and
unsubscriptions are done through the address "vrf-request@lvld.agilent.com".
If you need details, just send a message containing the text "help"
to "vrf-request@lvld.agilent.com".
---------------------------------------------------------------------

---------------------------------------------------------------------
This is the "vrf" maillist, managed by Majordomo.  To send messages to
this maillist, just email to "vrf@lvld.agilent.com".  Subscriptions and
unsubscriptions are done through the address "vrf-request@lvld.agilent.com".
If you need details, just send a message containing the text "help"
to "vrf-request@lvld.agilent.com".
---------------------------------------------------------------------

Outcomes