AnsweredAssumed Answered

vrf SCPI manual for the HP 6060B "electronic load" as well as the HP 6035A "power supply"

Question asked by jay.johannes on Oct 14, 2003
Latest reply on Oct 14, 2003 by jay.johannes

For the 6030B Load:
http://we.home.agilent.com/cgi-bin/bvpub/agilent/expandedresults/cp_Expanded
Results.jsp?NAV_ID=-11159.536880312.03&LANGUAGE_CODE=eng&contentType=Editori
al&entityType=ED35,ED44,ED38,ED46&COUNTRY_CODE=ZZ

The 6035A Power supply:
http://we.home.agilent.com/cgi-bin/bvpub/agilent/expandedresults/cp_Expanded
Results.jsp?prevSearchString=&prevSearchInterestArea=&LANGUAGE_CODE=eng&NAV_
ID=-11159.536880312.03&COUNTRY_CODE=ZZ&contentType=Editorial&entityType=ED35
%2CED44%2CED38%2CED46&searchString=6035A&searchInterestArea=-11145&search_fo
r_go=Go

You too can find these items directly.  Just go to the Agilent site and look
in the appropriate instrument product category.  Virtually every instrument
manual is online.

Jay Nemeth-Johannes
Complete Test
720 14th Street SW
Loveland, CO 80537
(970) 663-0006
www.completetest.com

-----Original Message-----
From: Enrique Velasco [mailto:Enrique.Velasco@ascom.com]
Sent: Wednesday, October 15, 2003 9:42 AM
To: VEE vrf
Subject: [vrf] SCPI manual for the HP 6060B "electronic load" as well as the
HP 6035A "power supply"

hello everyone,

anyone have any link/s where i can find a SCPI manual for the HP 6060B
"electronic load" as well as the HP 6035A "power supply"?
another question... when using a plug and play driver for a particular
instrument - do you need to have the instrument connected? somehow whenever
i run a simulation of the program i'm getting a exception breakpoint error
and VEE closes automatically. could it be that i don't have the extra I/O
libs or correct VISA dll to run the PNP driver? i'm still using the demo
version of the VEE pro 6.2 while i'm waiting for the software as well as
the USB interface to arrive sometime next week, as for now, i'm trying to
start or prepare the necessary blocks of the program before consolidating
all needed instruments to run by itself using PNP. or is it better for me
to use the direct I/O instead. well i have to go back to my first dilemma
using the standard SCPI commands. could somebody tell me the best approach
on how to tackle this issue.

again, thank you in advance.

IKE

Enrique "IKE" Velasco, Jr.
Junior Engineer


Delta Energy Systems (Arizona), Inc.
4400 E. Broadway Blvd., Suite 803, Tucson, AZ, 85715, USA
T +1 520 326 8401, F +1 520 326 8366
M +1 520 370 4537
enrique.velasco@delta-es.com
www.deltaenergysystems.com






---
You are currently subscribed to vrf as: jay.johannes@completetest.com
To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list,  email "vrf@it.lists.it.agilent.com".
If you need help with the mailing list send a message to
"owner-vrf@it.lists.it.agilent.com".


---
You are currently subscribed to vrf as: rsb@soco.agilent.com
To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list,  email "vrf@it.lists.it.agilent.com". 
If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com".

Outcomes