AnsweredAssumed Answered

vrf AW: Run time module

Question asked by VRFuser on May 25, 2003
Hello Martin,

yes, the reason is, that the compiled version automatically starts the
program. If you run this program in the environment, you can first change
parameters and then run the program.
I usually use the following way:
Directly after the "Start" command I add an Confirm-button in the program
flow, i.e. "Start" --> "Confirm-Button" --> Program-flow. The program waits,
until the button is pressed and you are allowed to change parameters and so
on.
Hope this helps.
Best regards,

Martin

Dr. Martin Alles


ATMEL Germany GmbH
Systems/Applications/Technologies COM240
Theresienstr. 2
D-74072 Heilbronn, Germany
Phone + 49-7131-67-3152, FAX -2244
mailto:martin.alles@hno.atmel.com
http://www.atmel.com



> -----Ursprngliche Nachricht-----
> Von:     mdh-technology@t-online.de [SMTP:mdh-technology@t-online.de]
> Gesendet am:     Montag, 26. Mai 2003 11:54
> An:     VEE vrf
> Betreff:     [vrf] Run time module
>
> I have created a program in Vee 6.1 (without external Hardware) and then
> generated a run time version of it.
> But I have difficulties by running the program. The run time version start
> and stop automatically and I have no cange to handle the program between
> this time (changing setting and so on). Does anybody know a simple
> programing solution  to overcome this problem?

> m. g.
> martin hauder
> ----------------------------------------------------------------------
> Dr. M. Hauder
> mdh technology GmbH
> Eberspoint, Fliederstr. 11
> D-84149 Velden
> Tel.: +49(0)8742 967138
> ---
> You are currently subscribed to vrf as: Martin.Alles@hno.atmel.com
> To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".
> To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
> To send messages to this mailing list, email
> "vrf@it.lists.it.agilent.com".
> If you need help with the mailing list send a message to
> "owner-vrf@it.lists.it.agilent.com".

---
You are currently subscribed to vrf as: rsb@soco.agilent.com
To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list,  email "vrf@it.lists.it.agilent.com". 
If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com".

Outcomes