AnsweredAssumed Answered

vrf Generating pulse using PGU

Question asked by fukui.yutaka on Aug 10, 2006
Hi,

The "Agilent 33120A Function/Arbitrary Waveform Generator" that I have can generate that waveform with its arbitrary waveform function. However, the instrument can not generate that waveform with its standard waveforms(sine ,square,triangle,ramp,noise, sin(x)/x, exponential rise exponential fall, card iac,dc volts) and it burst-modulation.

We have no information about the model of the Pulse Generator Unit you have.

Regards,
FUKUI Yutaka

----- Original Message -----
>Date: Thu, 10 Aug 2006 17:02:17 +0530
>From: Avadh Kumar Tibrawal <taq@cypress.com>
>To: VRF <vrf@agilent.com>
>Subject: [vrf] Generating pulse using PGU
>
>
>Hi
>
>I would like to generate a pulse in stress mode using pulse generator
>unit. The spec for pulse is as follows
>
>Start with 0 volt
>Vtop should be 10volt
>Vlow should be -10volt
>
>i.e. pulse should start at 0v goes high to 10v, remains their for
>specified time and then goes to -10v agains remains their for specified
>time and hen comes back to zero.
>
>
>I do not find how I can specify Vlow using SPCI command. A resent i am
>able to define a signal with Vbase as -10v and Vtop as 10v..
>
>
>I am new to VEE/SCPI programming.
>
>
>Avadh
>
>---
>You are currently subscribed to vrf as: fukui.yutaka@jp.fujitsu.com To
>subscribe please send an email to: "vrf-request@lists.it.agilent.com"
>with
the word subscribe in the message body.
>To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
>To send messages to this mailing list,  email "vrf@agilent.com". 
>If you need help with the mailing list send a message to
>"owner-vrf@it.lists.it.agilent.com".
>Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".


---
To subscribe please send an email to: "vrf-request@lists.it.agilent.com" with the word subscribe in the message body.
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list,  email "vrf@agilent.com". 
If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".

Outcomes