I'm sorry, I simplified the example too much, and know why the example does
not work. The real code deals with a table, and the table elements *ARE*
refreshed with every pass. After fixing the example, it works as intended,
so apparently in the real code I made a mistake. I'll go back and check
(again and again....)
--
Regards,
Rich
===================
Richard Kleinhenz
Wafer Engineering
845-892-2617
scubaman@us.ibm.com
===================
----- Forwarded by Richard Kleinhenz/Fishkill/IBM on 02/13/2004 02:18 PM
-----
Richard
Kleinhenz/Fishkil
l/IBM To
vrf
02/13/2004 01:55 cc
PM
Subject
quotes comparison - what am I
missing? HELP!
The attached code is not behaving as expected. I must be making a dumb
mistake... hope somebody can set me straight! I am looking through an
array, checking for a quote symbol. If so, I want to output the array
element above.
--
Regards,
Rich
===================
Richard Kleinhenz
Wafer Engineering
845-892-2617
scubaman@us.ibm.com
===================
---
You are currently subscribed to vrf as: rsb@soco.agilent.com
To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com".
Send your favorite VEE example to "VRF-EXAMPLES@agilent.com" for possible inclusion in VEE 7.0!