AnsweredAssumed Answered

vrf DMM and VEE

Question asked by chris.phipps on Nov 30, 2003

Like • Show 0 Likes0
Comment • 1

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"><?xml version="1.0" ?><HTML><HEAD><META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1"><TITLE>Message</TITLE><META content="MSHTML 6.00.2800.1276" name=GENERATOR></HEAD><BODY><DIV>Hi</DIV><DIV> </DIV><DIV>My vote is for another TTi box but the 1906A uses scpi so can be replaced (if required) with almost any other scpi compliant box with little effort.</DIV><DIV> </DIV><DIV>Good luck.</DIV><DIV> </DIV><DIV>Chris</DIV><BLOCKQUOTE style="MARGIN-RIGHT: 0px"> <DIV></DIV> <DIV class=OutlookMessageHeader lang=en-us dir=ltr align=left>-----Original Message----- From: barrie birmingham [mailto:b.birmingham@newi.ac.uk] Sent: 01 December 2003 12:23 To: VRF Subject: [vrf] DMM and VEE </DIV> <DIV align=left>>for a 0.5% accuracy measurement of resistance over a range of 6</DIV> <DIV align=left>>Ohms to 3000 Ohms, which proved to be a tall order. For a repeat >order I</DIV> <DIV align=left>>am considering using a separate bench Digital Multimeter >interfaced to the</DIV> <DIV align=left>>VEE program via RS232. Anyone know of a DMM which will meet the >Spec.</DIV> <DIV align=left>>preferably for around 500.</DIV> <DIV align=left> </DIV> <DIV align=left>Try the TTi1705 (NOT the 1604 - it's a pig to interface) for about 350 - it is easy to program - comes with RS232 and has a 100ohm lowest range with a resolution of 10mohm and stated accuracy of 0.1%+3digits.</DIV> <DIV align=left> </DIV> <DIV align=left>Barrie Birmingham</DIV> <DIV align=left>b.birmingham@newi.ac.uk</DIV> <DIV align=left></DIV>--- You are currently subscribed to vrf as: chris.phipps@analog.com To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com". To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com". To send messages to this mailing list, email "vrf@agilent.com". If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com". </BLOCKQUOTE>--- You are currently subscribed to vrf as: rsb@soco.agilent.com To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com". To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com". To send messages to this mailing list, email "vrf@agilent.com". If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com".</BODY></HTML>

No one else has this question

Outcomes

1 Reply

jay.johannes Nov 30, 2003 6:32 PM
Mark Correct
Correct Answer
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"><?xml version="1.0" ?><html xmlns:v="urn:schemas-microsoft-com:vml" xmlns:o="urn:schemas-microsoft-com:office:office" xmlns:w="urn:schemas-microsoft-com:office:word" xmlns="http://www.w3.org/TR/REC-html40"><head><META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1"><meta name=ProgId content=Word.Document><meta name=Generator content="Microsoft Word 10"><meta name=Originator content="Microsoft Word 10"><link rel=File-List href="cid:filelist.xml@01C3B7F6.6280EC80"><title>Message</title><style></style></head><body lang=EN-US link=blue vlink=purple style='tab-interval:.5in'><div class=Section1>The SCPI solution is good (how can I knockit, I wrote SCPI), but looking for an instrument with an IVI driver would beeven better. An IVI driver has beentested to guarantee interchange.<o:p></o:p><o:p> </o:p><div>Jay Nemeth-Johannes<fontcolor=navy><o:p></o:p>Complete Test<fontcolor=navy><o:p></o:p>720 SW 14th Street<fontcolor=navy><o:p></o:p>Loveland, Colorado 80537<fontcolor=navy><o:p></o:p><spanstyle='font-size:12.0pt;color:navy;mso-no-proof:yes'> <o:p></o:p>www.completetest.com<o:p></o:p></div><div style='border:none;border-left:solid blue 1.5pt;padding:0in 0in 0in 4.0pt'>-----Original Message-----
From: Chris Phipps[mailto:chris.phipps@analog.com]
Sent<spanstyle='font-weight:bold'>: Monday, December 01, 2003 6:25 AM
To: VRF
Subject: [vrf] RE: DMM and VEE<o:p> </o:p><div>Hi<o:p></o:p></div><div> <o:p></o:p></div><div>My vote is for another TTi box but the1906A uses scpi so can be replaced (if required) with almost any other scpicompliant box with little effort.<o:p></o:p></div><div> <o:p></o:p></div><div>Good luck.<o:p></o:p></div><div> <o:p></o:p></div><div>Chris<o:p></o:p></div><blockquote style='margin-top:5.0pt;margin-right:0in;margin-bottom:5.0pt'><spanstyle='font-size:10.0pt;font-family:Tahoma'>-----Original Message-----
From: barrie birmingham[mailto:b.birmingham@newi.ac.uk]
Sent: 01 December 2003 12:23
To: VRF
Subject: [vrf] DMM and VEE<o:p></o:p>>for a 0.5% accuracy measurement of resistanceover a range of 6<o:p></o:p>>Ohms to 3000 Ohms, which proved to be a tallorder. For a repeat >order I<o:p></o:p>>am considering using a separate bench DigitalMultimeter >interfaced to the<o:p></o:p>>VEE program via RS232. Anyone know of a DMMwhich will meet the >Spec.<o:p></o:p>>preferably for around 500.<o:p></o:p><o:p> </o:p>Try the TTi1705 (NOT the 1604 - it's a pig to interface)for about 350 - it is easy to program - comes with RS232 and has a 100ohmlowest range with a resolution of 10mohm and stated accuracy of 0.1%+3digits.<o:p></o:p><o:p> </o:p>Barrie Birmingham<o:p></o:p>b.birmingham@newi.ac.uk<o:p></o:p>---
You are currently subscribed to vrf as: chris.phipps@analog.com
To subscribe send a blank email to"join-vrf@it.lists.it.agilent.com".
To unsubscribe send a blank email to"leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to"owner-vrf@it.lists.it.agilent.com". <o:p></o:p></blockquote>---
You are currently subscribed to vrf as: jay.johannes@completetest.com
To subscribe send a blank email to"join-vrf@it.lists.it.agilent.com".
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to"owner-vrf@it.lists.it.agilent.com". <o:p></o:p></div></div>--- You are currently subscribed to vrf as: rsb@soco.agilent.com To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com". To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com". To send messages to this mailing list, email "vrf@agilent.com". If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com".</BODY></html>
Like • Show 0 Likes0
Actions

vrf DMM and VEE

Outcomes

Related Content

Recommended Content