AnsweredAssumed Answered

vrf toolbar

Question asked by detlef.baranski on Dec 6, 2004
Latest reply on Dec 18, 2005 by wshooa

Like • Show 0 Likes0
Comment • 16

Have a look at:

www.my-vee.de under downloads for the toolbar:

http://www.my-vee.de/zips/toolbar.zip

Although it is german, you will understand

best regards,
detlef

-----Ursprngliche Nachricht-----
Von: wsh wsh [mailto:wshooa@yahoo.com]
Gesendet: Dienstag, 30. November 2004 19:28
An: VRF
Betreff: [vrf] toolbar

hi
i want to make a toolbar with its menues in my program can any one tell me
how?
This message and any attachments are confidential, for the exclusive use of
the addressee and may be legally privileged. Any other distribution, use or
reproduction is unauthorised and prohibited. If you have received this
message in error, please notify the sender immediately and delete the
message from your system.

Visit our internet site at http://www.pilkington.com

---
You are currently subscribed to vrf as: rsb@soco.agilent.com
To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com".

No one else has this question

Outcomes

16 Replies

wshooa Nov 30, 2004 10:27 AM
Mark Correct
Correct Answer
<DIV>hi </DIV><DIV>i want to make a toolbar in my program can any one tell me how?</DIV><p> <hr size=1>Do you Yahoo!?
Read only the mail you want - <a href="http://us.rd.yahoo.com/mail_us/taglines/spamguard/*http://promotions.yahoo.com/new_mail/static/protection.html">Yahoo! Mail SpamGuard</a>.---You are currently subscribed to vrf as: rsb@soco.agilent.comTo subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".To send messages to this mailing list, email "vrf@agilent.com". If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com".
Like • Show 0 Likes0
Actions
wshooa Nov 30, 2004 10:28 AM
Mark Correct
Correct Answer
<DIV><DIV>hi </DIV><DIV>i want to make a toolbar with its menues in my program can any one tell me how?</DIV></DIV><p> <hr size=1>Do you Yahoo!?
Meet the <a href="http://my.yahoo.com">all-new My Yahoo!</a> Try it today! ---You are currently subscribed to vrf as: rsb@soco.agilent.comTo subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".To send messages to this mailing list, email "vrf@agilent.com". If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com".
Like • Show 0 Likes0
Actions
VRFuser Sep 12, 2005 8:59 PM
Mark Correct
Correct Answer
> I would like to know if there is
> an option to build a tool bar in
> vee, like File, Edit ect

Well I think that's a menu bar - but no, not as such. Not directly anyway.
However, you can use a MenuBar control. There's also a ToolBar control if
that's more suited to your purpose (both are part of several different
development environments. There are also several independent versions of
each control).

Several examples can be found for each (using MS versions):
http://www.oswegosw.com/SearchVRF.php?an=menu
http://www.oswegosw.com/SearchVRF.php?an=tool
-SHAWN-

---
You are currently subscribed to vrf as: rsb@soco.agilent.com
To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".
Like • Show 0 Likes0
Actions
VRFuser Sep 12, 2005 8:59 PM
Mark Correct
Correct Answer
> I would like to know if there is
> an option to build a tool bar in
> vee, like File, Edit ect

Well I think that's a menu bar - but no, not as such. Not directly anyway.
However, you can use a MenuBar control. There's also a ToolBar control if
that's more suited to your purpose (both are part of several different
development environments. There are also several independent versions of
each control).

Several examples can be found for each (using MS versions):
http://www.oswegosw.com/SearchVRF.php?an=menu
http://www.oswegosw.com/SearchVRF.php?an=tool
-SHAWN-

---
You are currently subscribed to vrf as: rsb@soco.agilent.com
To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".
Like • Show 0 Likes0
Actions
VRFuser Sep 12, 2005 8:59 PM
Mark Correct
Correct Answer
> I would like to know if there is
> an option to build a tool bar in
> vee, like File, Edit ect

Well I think that's a menu bar - but no, not as such. Not directly anyway.
However, you can use a MenuBar control. There's also a ToolBar control if
that's more suited to your purpose (both are part of several different
development environments. There are also several independent versions of
each control).

Several examples can be found for each (using MS versions):
http://www.oswegosw.com/SearchVRF.php?an=menu
http://www.oswegosw.com/SearchVRF.php?an=tool
-SHAWN-

---
You are currently subscribed to vrf as: rsb@soco.agilent.com
To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".
Like • Show 0 Likes0
Actions
arief12 Sep 13, 2005 3:55 AM
Mark Correct
Correct Answer
<html xmlns:o="urn:schemas-microsoft-com:office:office" xmlns:w="urn:schemas-microsoft-com:office:word" xmlns="http://www.w3.org/TR/REC-html40"><head><META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=us-ascii"><meta name=Generator content="Microsoft Word 11 (filtered medium)"><style></style></head><body lang=EN-US link=blue vlink=purple><div class=Section1><p class=MsoNormal><font size=2 face=Arial><span style='font-size:10.0pt;font-family:Arial'>Hi all<o:p></o:p></span></font></p><p class=MsoNormal><font size=2 face=Arial><span style='font-size:10.0pt;font-family:Arial'>I would like to know if there is an option to build a toolbar in vee, like File, Edit ect’<o:p></o:p></span></font></p><p class=MsoNormal><font size=2 face=Arial><span style='font-size:10.0pt;font-family:Arial'><o:p> </o:p></span></font></p><p class=MsoNormal><strong><b><font size=4 face="Monotype Corsiva"><spanstyle='font-size:13.5pt;font-family:"Monotype Corsiva"'>Regards</span></font></b></strong><o:p></o:p></p><p class=MsoNormal><strong><b><font size=4 face="Monotype Corsiva"><spanstyle='font-size:13.5pt;font-family:"Monotype Corsiva"'>Arie Fainbrun</span></font></b></strong><o:p></o:p></p><p class=MsoNormal><strong><b><font size=4 face="Monotype Corsiva"><spanstyle='font-size:13.5pt;font-family:"Monotype Corsiva"'>Direct: 972-(0)524523459</span></font></b></strong><o:p></o:p></p><p class=MsoNormal><strong><b><font size=4 face="Monotype Corsiva"><spanstyle='font-size:13.5pt;font-family:"Monotype Corsiva"'>Office: 972-(0)88577304</span></font></b></strong><o:p></o:p></p><p class=MsoNormal><strong><b><font size=4 face="Monotype Corsiva"><spanstyle='font-size:13.5pt;font-family:"Monotype Corsiva"'>Fax: 972-(0)88572658</span></font></b></strong><o:p></o:p></p><p class=MsoNormal><strong><b><font size=4 face="Monotype Corsiva"><spanstyle='font-size:13.5pt;font-family:"Monotype Corsiva"'>Email:arief12@netvision.net.il</span></font></b></strong><o:p></o:p></p><p class=MsoNormal><font size=3 face="Times New Roman"><span style='font-size:12.0pt'><o:p> </o:p></span></font></p></div><BR>---<BR>You are currently subscribed to vrf as: rsb@soco.agilent.com<BR>To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".<BR>To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".<BR>To send messages to this mailing list, email "vrf@agilent.com". <BR>If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com".<BR>Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".</BODY></html>
Like • Show 0 Likes0
Actions
arief12 Sep 13, 2005 3:55 AM
Mark Correct
Correct Answer
<html xmlns:o="urn:schemas-microsoft-com:office:office" xmlns:w="urn:schemas-microsoft-com:office:word" xmlns="http://www.w3.org/TR/REC-html40"><head><META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=us-ascii"><meta name=Generator content="Microsoft Word 11 (filtered medium)"><style></style></head><body lang=EN-US link=blue vlink=purple><div class=Section1><p class=MsoNormal><font size=2 face=Arial><span style='font-size:10.0pt;font-family:Arial'>Hi all<o:p></o:p></span></font></p><p class=MsoNormal><font size=2 face=Arial><span style='font-size:10.0pt;font-family:Arial'>I would like to know if there is an option to build a toolbar in vee, like File, Edit ect’<o:p></o:p></span></font></p><p class=MsoNormal><font size=2 face=Arial><span style='font-size:10.0pt;font-family:Arial'><o:p> </o:p></span></font></p><p class=MsoNormal><strong><b><font size=4 face="Monotype Corsiva"><spanstyle='font-size:13.5pt;font-family:"Monotype Corsiva"'>Regards</span></font></b></strong><o:p></o:p></p><p class=MsoNormal><strong><b><font size=4 face="Monotype Corsiva"><spanstyle='font-size:13.5pt;font-family:"Monotype Corsiva"'>Arie Fainbrun</span></font></b></strong><o:p></o:p></p><p class=MsoNormal><strong><b><font size=4 face="Monotype Corsiva"><spanstyle='font-size:13.5pt;font-family:"Monotype Corsiva"'>Direct: 972-(0)524523459</span></font></b></strong><o:p></o:p></p><p class=MsoNormal><strong><b><font size=4 face="Monotype Corsiva"><spanstyle='font-size:13.5pt;font-family:"Monotype Corsiva"'>Office: 972-(0)88577304</span></font></b></strong><o:p></o:p></p><p class=MsoNormal><strong><b><font size=4 face="Monotype Corsiva"><spanstyle='font-size:13.5pt;font-family:"Monotype Corsiva"'>Fax: 972-(0)88572658</span></font></b></strong><o:p></o:p></p><p class=MsoNormal><strong><b><font size=4 face="Monotype Corsiva"><spanstyle='font-size:13.5pt;font-family:"Monotype Corsiva"'>Email:arief12@netvision.net.il</span></font></b></strong><o:p></o:p></p><p class=MsoNormal><font size=3 face="Times New Roman"><span style='font-size:12.0pt'><o:p> </o:p></span></font></p></div><BR>---<BR>You are currently subscribed to vrf as: rsb@soco.agilent.com<BR>To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".<BR>To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".<BR>To send messages to this mailing list, email "vrf@agilent.com". <BR>If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com".<BR>Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".</BODY></html>
Like • Show 0 Likes0
Actions
arief12 Sep 13, 2005 3:55 AM
Mark Correct
Correct Answer
<html xmlns:o="urn:schemas-microsoft-com:office:office" xmlns:w="urn:schemas-microsoft-com:office:word" xmlns="http://www.w3.org/TR/REC-html40"><head><META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=us-ascii"><meta name=Generator content="Microsoft Word 11 (filtered medium)"><style></style></head><body lang=EN-US link=blue vlink=purple><div class=Section1><p class=MsoNormal><font size=2 face=Arial><span style='font-size:10.0pt;font-family:Arial'>Hi all<o:p></o:p></span></font></p><p class=MsoNormal><font size=2 face=Arial><span style='font-size:10.0pt;font-family:Arial'>I would like to know if there is an option to build a toolbar in vee, like File, Edit ect’<o:p></o:p></span></font></p><p class=MsoNormal><font size=2 face=Arial><span style='font-size:10.0pt;font-family:Arial'><o:p> </o:p></span></font></p><p class=MsoNormal><strong><b><font size=4 face="Monotype Corsiva"><spanstyle='font-size:13.5pt;font-family:"Monotype Corsiva"'>Regards</span></font></b></strong><o:p></o:p></p><p class=MsoNormal><strong><b><font size=4 face="Monotype Corsiva"><spanstyle='font-size:13.5pt;font-family:"Monotype Corsiva"'>Arie Fainbrun</span></font></b></strong><o:p></o:p></p><p class=MsoNormal><strong><b><font size=4 face="Monotype Corsiva"><spanstyle='font-size:13.5pt;font-family:"Monotype Corsiva"'>Direct: 972-(0)524523459</span></font></b></strong><o:p></o:p></p><p class=MsoNormal><strong><b><font size=4 face="Monotype Corsiva"><spanstyle='font-size:13.5pt;font-family:"Monotype Corsiva"'>Office: 972-(0)88577304</span></font></b></strong><o:p></o:p></p><p class=MsoNormal><strong><b><font size=4 face="Monotype Corsiva"><spanstyle='font-size:13.5pt;font-family:"Monotype Corsiva"'>Fax: 972-(0)88572658</span></font></b></strong><o:p></o:p></p><p class=MsoNormal><strong><b><font size=4 face="Monotype Corsiva"><spanstyle='font-size:13.5pt;font-family:"Monotype Corsiva"'>Email:arief12@netvision.net.il</span></font></b></strong><o:p></o:p></p><p class=MsoNormal><font size=3 face="Times New Roman"><span style='font-size:12.0pt'><o:p> </o:p></span></font></p></div><BR>---<BR>You are currently subscribed to vrf as: rsb@soco.agilent.com<BR>To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".<BR>To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".<BR>To send messages to this mailing list, email "vrf@agilent.com". <BR>If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com".<BR>Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".</BODY></html>
Like • Show 0 Likes0
Actions
mark.goldberg Nov 20, 2005 8:47 PM
Mark Correct
Correct Answer
Shawn,

Is there a way to take the output of the button and use it to set the value of the arrow to the dropped down state? In other words force it or trick it?

Thanks,

Mark

-----Original Message-----
From: Shawn Fessenden [mailto:shawn@testech-ltd.com]
Sent: Monday, November 21, 2005 1:34 PM
To: VRF
Subject: RE: [vrf] toolbar

> I asked the question about the arrows
> and was never able to find a solution
> or a response.

I think the basic problem with that might be control confusion. The function of a toolbar button is to execute one single command when clicked. The dropdown was added to perform variations on a command - not to provide access to different commands. The dropdown is always activated by clicking the dropdown arrow - it's never activated by clicking the main button. That's always reserved for the main function.

Clicking a single area to drop down a selectable list is a menu, not a toolbar. Said another way... a menu can usually emulate a complex toolbar, but a complex toolbar can never emulate a menu.

These issues are all covered in the Windows UI Design Guide. I don't know if this book is still in print (judging by contemporary software, I doubt it) but a partial reprint is at:

http://msdn.microsoft.com/library/default.asp?url=/library/en-us/dnwue/html/welcome.asp

In the print, there are specific warnings against abusing toolbars in exactly this way.
-SHAWN-

---
You are currently subscribed to vrf as: rsb@soco.agilent.com
To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".
Like • Show 0 Likes0
Actions
mark.goldberg Nov 20, 2005 9:41 PM
Mark Correct
Correct Answer
Shawn,

Is there a way to take the output of the button and use it to set the value of the arrow to the dropped down state? In other words force it or trick it?

Thanks,

Mark

-----Original Message-----
From: Shawn Fessenden [mailto:shawn@testech-ltd.com]
Sent: Monday, November 21, 2005 1:34 PM
To: VRF
Subject: RE: [vrf] toolbar

> I asked the question about the arrows
> and was never able to find a solution
> or a response.

I think the basic problem with that might be control confusion. The function of a toolbar button is to execute one single command when clicked. The dropdown was added to perform variations on a command - not to provide access to different commands. The dropdown is always activated by clicking the dropdown arrow - it's never activated by clicking the main button. That's always reserved for the main function.

Clicking a single area to drop down a selectable list is a menu, not a toolbar. Said another way... a menu can usually emulate a complex toolbar, but a complex toolbar can never emulate a menu.

These issues are all covered in the Windows UI Design Guide. I don't know if this book is still in print (judging by contemporary software, I doubt it) but a partial reprint is at:

http://msdn.microsoft.com/library/default.asp?url=/library/en-us/dnwue/html/welcome.asp

In the print, there are specific warnings against abusing toolbars in exactly this way.
-SHAWN-

---
You are currently subscribed to vrf as: rsb@soco.agilent.com
To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".
Like • Show 0 Likes0
Actions
VRFuser Nov 20, 2005 11:33 PM
Mark Correct
Correct Answer

Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".
Like • Show 0 Likes0
Actions
VRFuser Nov 20, 2005 11:39 PM
Mark Correct
Correct Answer
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"><HTML><HEAD><META http-equiv=Content-Type content="text/html; charset=us-ascii"><META content="MSHTML 6.00.2900.2769" name=GENERATOR></HEAD><BODY><DIV dir=ltr align=left><SPAN class=067441421-21112005><FONT face=Arial color=#0000ff size=2>While we're on the toolbar subject. Is there a way to enable or disable a toolbar button without previously selecting it. I would like to enable one button after selecting another button. A good example would be in one program I have a start button and a calibrate button. I would like to set the start button default to disabled, easily accomplished, and then enabled after the calibrate button has been selected.</FONT></SPAN></DIV><DIV dir=ltr align=left><SPAN class=067441421-21112005><FONT face=Arial color=#0000ff size=2></FONT></SPAN> </DIV><DIV dir=ltr align=left><SPAN class=067441421-21112005><FONT face=Arial color=#0000ff size=2></FONT></SPAN> </DIV><DIV class=OutlookMessageHeader lang=en-us dir=ltr align=left><HR tabIndex=-1><FONT face=Tahoma size=2><B>From:</B> Goldberg, Mark [mailto:Mark.Goldberg@ATK.COM] <BR><B>Sent:</B> Monday, November 21, 2005 3:47 PM<BR><B>To:</B> VRF<BR><B>Subject:</B> RE: [vrf] toolbar<BR></FONT><BR></DIV><DIV></DIV><DIV><SPAN class=794244520-21112005><FONT face=Arial color=#0000ff size=2>Attached is a menu I created several years ago and rebuilt here at ATK. I asked the question about the arrows and was never able to find a solution or a response. Hope this helps.</FONT></SPAN></DIV><DIV><SPAN class=794244520-21112005><FONT face=Arial color=#0000ff size=2></FONT></SPAN> </DIV><DIV><SPAN class=794244520-21112005><FONT face=Arial color=#0000ff size=2>Mark</FONT></SPAN></DIV><DIV><SPAN class=794244520-21112005><FONT face=Arial color=#0000ff size=2></FONT></SPAN> </DIV><DIV><SPAN class=794244520-21112005></SPAN> </DIV><BLOCKQUOTE> <DIV class=OutlookMessageHeader dir=ltr align=left><FONT face=Tahoma size=2>-----Original Message-----<BR><B>From:</B> wsh wsh [mailto:wshooa@yahoo.com]<BR><B>Sent:</B> Monday, November 21, 2005 12:06 PM<BR><B>To:</B> VRF<BR><B>Subject:</B> [vrf] toolbar<BR><BR></FONT></DIV> <DIV id=RTEContent>hi </DIV> <DIV>i use an active x control in my program ( microsoft windows common control 6.0 (sp4)) to make a toolbar, i have two problems </DIV> <DIV>1st, the dropdwon menus working only with pressing the arrow not the button and this is not accepted ( when we choose the button style trb. dropdown )</DIV> <DIV>2nd, i try to make a toolbar with dropdown menus ( show panels as dropdown menu ) the problem is how to make a button is high lighted when selectet( the button format is custem)</DIV> <P> <HR SIZE=1> <A href="http://us.lrd.yahoo.com/_ylc=X3oDMTFqODRtdXQ4BF9TAzMyOTc1MDIEX3MDOTY2ODgxNjkEcG9zAzEEc2VjA21haWwtZm9vdGVyBHNsawNmYw--/SIG=110oav78o/**http%3a//farechase.yahoo.com/">Yahoo! FareChase - Search multiple travel sites in one click.</A> --- You are currently subscribed to vrf as: Mark.Goldberg@atk.com To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com". To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com". To send messages to this mailing list, email "vrf@agilent.com". If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com". Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".</BLOCKQUOTE><BR>--- <BR>You are currently subscribed to vrf as: drowland@rfmd.com <BR>To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com". <BR>To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com". <BR>To send messages to this mailing list, email "vrf@agilent.com". <BR>If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com". <BR>Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/". <BR>---<BR>You are currently subscribed to vrf as: rsb@soco.agilent.com<BR>To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".<BR>To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".<BR>To send messages to this mailing list, email "vrf@agilent.com". <BR>If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com".<BR>Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".</BODY></HTML>
Like • Show 0 Likes0
Actions
VRFuser Nov 21, 2005 12:22 AM
Mark Correct
Correct Answer
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"><HTML><HEAD><META http-equiv=Content-Type content="text/html; charset=us-ascii"><META content="MSHTML 6.00.2900.2769" name=GENERATOR></HEAD><BODY><DIV dir=ltr align=left><SPAN class=067441421-21112005><FONT face=Arial color=#0000ff size=2>While we're on the toolbar subject. Is there a way to enable or disable a toolbar button without previously selecting it. I would like to enable one button after selecting another button. A good example would be in one program I have a start button and a calibrate button. I would like to set the start button default to disabled, easily accomplished, and then enabled after the calibrate button has been selected.</FONT></SPAN></DIV><DIV dir=ltr align=left><SPAN class=067441421-21112005><FONT face=Arial color=#0000ff size=2></FONT></SPAN> </DIV><DIV dir=ltr align=left><SPAN class=067441421-21112005><FONT face=Arial color=#0000ff size=2></FONT></SPAN> </DIV><DIV class=OutlookMessageHeader lang=en-us dir=ltr align=left><HR tabIndex=-1><FONT face=Tahoma size=2><B>From:</B> Goldberg, Mark [mailto:Mark.Goldberg@ATK.COM] <BR><B>Sent:</B> Monday, November 21, 2005 3:47 PM<BR><B>To:</B> VRF<BR><B>Subject:</B> RE: [vrf] toolbar<BR></FONT><BR></DIV><DIV></DIV><DIV><SPAN class=794244520-21112005><FONT face=Arial color=#0000ff size=2>Attached is a menu I created several years ago and rebuilt here at ATK. I asked the question about the arrows and was never able to find a solution or a response. Hope this helps.</FONT></SPAN></DIV><DIV><SPAN class=794244520-21112005><FONT face=Arial color=#0000ff size=2></FONT></SPAN> </DIV><DIV><SPAN class=794244520-21112005><FONT face=Arial color=#0000ff size=2>Mark</FONT></SPAN></DIV><DIV><SPAN class=794244520-21112005><FONT face=Arial color=#0000ff size=2></FONT></SPAN> </DIV><DIV><SPAN class=794244520-21112005></SPAN> </DIV><BLOCKQUOTE> <DIV class=OutlookMessageHeader dir=ltr align=left><FONT face=Tahoma size=2>-----Original Message-----<BR><B>From:</B> wsh wsh [mailto:wshooa@yahoo.com]<BR><B>Sent:</B> Monday, November 21, 2005 12:06 PM<BR><B>To:</B> VRF<BR><B>Subject:</B> [vrf] toolbar<BR><BR></FONT></DIV> <DIV id=RTEContent>hi </DIV> <DIV>i use an active x control in my program ( microsoft windows common control 6.0 (sp4)) to make a toolbar, i have two problems </DIV> <DIV>1st, the dropdwon menus working only with pressing the arrow not the button and this is not accepted ( when we choose the button style trb. dropdown )</DIV> <DIV>2nd, i try to make a toolbar with dropdown menus ( show panels as dropdown menu ) the problem is how to make a button is high lighted when selectet( the button format is custem)</DIV> <P> <HR SIZE=1> <A href="http://us.lrd.yahoo.com/_ylc=X3oDMTFqODRtdXQ4BF9TAzMyOTc1MDIEX3MDOTY2ODgxNjkEcG9zAzEEc2VjA21haWwtZm9vdGVyBHNsawNmYw--/SIG=110oav78o/**http%3a//farechase.yahoo.com/">Yahoo! FareChase - Search multiple travel sites in one click.</A> --- You are currently subscribed to vrf as: Mark.Goldberg@atk.com To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com". To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com". To send messages to this mailing list, email "vrf@agilent.com". If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com". Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".</BLOCKQUOTE><BR>--- <BR>You are currently subscribed to vrf as: drowland@rfmd.com <BR>To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com". <BR>To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com". <BR>To send messages to this mailing list, email "vrf@agilent.com". <BR>If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com". <BR>Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/". <BR>---<BR>You are currently subscribed to vrf as: rsb@soco.agilent.com<BR>To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".<BR>To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".<BR>To send messages to this mailing list, email "vrf@agilent.com". <BR>If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com".<BR>Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".</BODY></HTML>
Like • Show 0 Likes0
Actions
wshooa Nov 21, 2005 12:05 PM
Mark Correct
Correct Answer
<DIV id=RTEContent>hi </DIV> <DIV>i use an active x control in my program ( microsoft windows common control 6.0 (sp4)) to make a toolbar, i have two problems </DIV> <DIV>1st, the dropdwon menus working only with pressing the arrow not the button and this is not accepted ( when we choose the button style trb. dropdown )</DIV> <DIV>2nd, i try to make a toolbar with dropdown menus ( show panels as dropdown menu ) the problem is how to make a button is high lighted when selectet( the button format is custem)</DIV><p>
<hr size=1> <a href="http://us.lrd.yahoo.com/_ylc=X3oDMTFqODRtdXQ4BF9TAzMyOTc1MDIEX3MDOTY2ODgxNjkEcG9zAzEEc2VjA21haWwtZm9vdGVyBHNsawNmYw--/SIG=110oav78o/**http%3a//farechase.yahoo.com/">Yahoo! FareChase - Search multiple travel sites in one click.</a>

---
You are currently subscribed to vrf as: rsb@soco.agilent.com
To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".
Like • Show 0 Likes0
Actions
wshooa Nov 21, 2005 12:19 PM
Mark Correct
Correct Answer
<DIV id=RTEContent> <DIV id=RTEContent>hi </DIV> <DIV>i use an active x control in my program ( microsoft windows common control 6.0 (sp4)) to make a toolbar, i have two problems </DIV> <DIV>1st, the dropdwon menus working only with pressing the arrow not the button and this is not accepted ( when we choose the button style trb. dropdown )</DIV> <DIV>2nd, i try to make a toolbar with dropdown menus ( show panels as dropdown menu ) the problem is how to make a button is high lighted when selectet( the button format is custem)</DIV></DIV><p>
<hr size=1> <a href="http://us.lrd.yahoo.com/_ylc=X3oDMTFqODRtdXQ4BF9TAzMyOTc1MDIEX3MDOTY2ODgxNjkEcG9zAzEEc2VjA21haWwtZm9vdGVyBHNsawNmYw--/SIG=110oav78o/**http%3a//farechase.yahoo.com/">Yahoo! FareChase - Search multiple travel sites in one click.</a>

---
You are currently subscribed to vrf as: rsb@soco.agilent.com
To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".
To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".
To send messages to this mailing list, email "vrf@agilent.com".
If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com".
Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".
Like • Show 0 Likes0
Actions
wshooa Dec 18, 2005 2:06 AM
Mark Correct
Correct Answer
<DIV id=RTEContent>hi all </DIV> <DIV>i make a programe and i use active x component toolbar i have 2 problems</DIV> <DIV> </DIV> <DIV>1- i make a shortcut for my vxe programe using ( geometry ) to run it in all display inote that the toolbar buttons disapear and if i minmize the program and maxmiz it again or choose any program window and go back to my program again it apear and work normaly ( if i run the vxe program directlly without the geometry it work normal ) </DIV> <DIV> </DIV> <DIV>2- in the same program after finishing work in it and close it the windows give me a massege say that the memory location (.....) can not writ on it by vxe application</DIV> <DIV> </DIV> <DIV>why and what can i do </DIV><p>__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com ---You are currently subscribed to vrf as: rsb@soco.agilent.comTo subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".To send messages to this mailing list, email "vrf@agilent.com". If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com".Search the "unofficial vrf archive" at "www.oswegosw.com/vrf_archive/".
Like • Show 0 Likes0
Actions

vrf toolbar

Outcomes

Related Content

Recommended Content