<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"><HTML><HEAD><TITLE></TITLE><META http-equiv=Content-Type content="text/html; charset=iso-8859-1"><META content="MSHTML 6.00.2800.1458" name=GENERATOR></HEAD><BODY><DIV><SPAN class=250230106-22112004><FONT face=Arial color=#0000ff size=2>Antti,</FONT></SPAN></DIV><DIV><SPAN class=250230106-22112004><FONT face=Arial color=#0000ff size=2></FONT></SPAN> </DIV><DIV><SPAN class=250230106-22112004><FONT face=Arial color=#0000ff size=2>The reason is, the data going in is not formatted the same. The upper graph has data coming in as individual scalars, but the data coming out of the collectors feeding the bottom graph are single element arrays. When you feed scalars into the graph it will plot point-to-point, but when you feed an array into the graph it ASSUMES it contains all the points you want to plot in one shot. When a new array comes in, the plot is cleared and the new data is presented.</FONT></SPAN></DIV><DIV><SPAN class=250230106-22112004><FONT face=Arial color=#0000ff size=2></FONT></SPAN> </DIV><DIV><SPAN class=250230106-22112004><FONT face=Arial color=#0000ff size=2>If you want them to look the same, take the XEQ pins from the three COLLECTOR boxes and attach them to the bottom of the FOR COUNT box. Now when you run it you will get nothing on the bottom box until the very end, THEN you will get the entire array plotted in point-to-point style just like the top array. (As a side note, it's faster to plot this way then plotting one scalar value per loop.)</FONT></SPAN></DIV><DIV><SPAN class=250230106-22112004><FONT face=Arial color=#0000ff size=2></FONT></SPAN> </DIV><DIV><SPAN class=250230106-22112004><FONT face=Arial color=#0000ff size=2>Cheers,</FONT></SPAN></DIV><DIV><SPAN class=250230106-22112004><FONT face=Arial color=#0000ff size=2>Mike Groves</FONT> </SPAN></DIV><BLOCKQUOTE dir=ltr style="MARGIN-RIGHT: 0px"> <DIV class=OutlookMessageHeader dir=ltr align=left><FONT face=Tahoma size=2>-----Original Message-----<BR><B>From:</B> Antti.Suhonen@elektrobit.com [mailto:Antti.Suhonen@elektrobit.com]<BR><B>Sent:</B> Sunday, November 21, 2004 10:38 PM<BR><B>To:</B> VRF<BR><B>Subject:</B> [vrf] Re: what's it?<BR><BR></FONT></DIV> <DIV><FONT size=2><FONT color=#0000ff><FONT face=Arial>Hi all,<BR><BR>Erm...Sorry about the delivery, its the head ;p</FONT></FONT></FONT></DIV> <DIV><FONT size=2><FONT color=#0000ff><FONT face=Arial></FONT></FONT></FONT> </DIV> <DIV><FONT face=Arial color=#0000ff size=2>OK, here's again. Why the lower thread works different from upper? On every cycle every terminal from graph has new data but the 'markers' just stay there, they don't clear like the trace4 does...Which I expect.</FONT></DIV> <DIV><FONT face=Arial color=#0000ff size=2></FONT> </DIV> <DIV><FONT face=Arial color=#0000ff size=2>Am I missing something besides the gray matter???</FONT></DIV> <DIV><FONT face=Arial color=#0000ff size=2></FONT> </DIV> <DIV><FONT face=Arial color=#0000ff size=2>-Antti</FONT></DIV> <DIV><FONT size=2><FONT face=Arial></FONT> </DIV> <DIV><FONT face=Arial></FONT><BR><BR></FONT><FONT face=Arial size=2>> -----Original Message-----<BR>> From: bill.ossmann@philips.com [</FONT><A href="mailto:bill.ossmann@philips.com"><FONT face=Arial color=#000000 size=2>mailto:bill.ossmann@philips.com</FONT></A><FONT face=Arial size=2>]<BR>> Sent: 19. marraskuuta 2004 16:03<BR>> To: VRF<BR>> Subject: [vrf] Re: what's it?<BR>><BR>><BR>><BR>><BR>><BR>><BR>><BR>> Antti,<BR>><BR>> The difference is that the collectors output arrays of length<BR>> 1, and the XY<BR>> trace displays in the bottom thread treat these differently from the<BR>> scalars in the top thread. If you follow the collector with<BR>> the formula<BR>> a[0], the behavior is the same as the thread without<BR>> collectors. I'm not<BR>> sure which behavior is the one you want; I've used both at<BR>> different times.<BR>> --<BR>> Bill Ossmann<BR>> Philips Ultrasound<BR>> e-mail: bill.ossmann@philips.com<BR>> ---------------------------------------------------<BR>><BR>><BR>><BR>> Hi all,<BR>><BR>> Anyone got a clue what's happening here?<BR>><BR>> The build coord's have something to do with this? It behaves<BR>> the same when<BR>> UO unpacked...<BR>><BR>> BR,<BR>> -Antti<BR>> ~~~~~<BR>> [IMAGE]<BR>><BR>><BR>> ----------------------------------------------------------------<BR>> Please note: This e-mail may contain privileged and confidential<BR>> information and is intended solely for the addressee. If you are<BR>> not the intended recipient or an employee responsible for<BR>> delivering this message to the intended recipient, you are<BR>> hereby notified that any review, publication, dissemination,<BR>> distribution, copying or use of the information in this message<BR>> is strictly prohibited. If you have received this e-mail by<BR>> error, please notify the sender immediately by replying to the<BR>> message and subsequently delete it from your system.<BR>><BR>> E-mail is susceptible to data corruption, interception,<BR>> unauthorized amendment, tampering and viruses. We only send and<BR>> receive e-mail messages on the basis that we are not liable for<BR>> any such corruption, interception, amendment, tampering,<BR>> viruses, any other reprehensible acts or any consequences of<BR>> the aforementioned.<BR>><BR>> (Embedded image moved to file: pic29129.jpg)<BR>><BR>> ---<BR>> You are currently subscribed to vrf as: bill.ossmann@philips.com<BR>> To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".<BR>> To unsubscribe send a blank email to<BR>> "leave-vrf@it.lists.it.agilent.com".<BR>> To send messages to this mailing list, email "vrf@agilent.com".<BR>> If you need help with the mailing list send a message to<BR>> "owner-vrf@it.lists.it.agilent.com".<BR>><BR>><BR>> [attachment "test.vee" deleted by Bill Ossmann/ANR/MS/PHILIPS]<BR>><BR>> </FONT></DIV><PRE>----------------------------------------------------------------Please note: This e-mail may contain privileged and confidentialinformation and is intended solely for the addressee. If you arenot the intended recipient or an employee responsible fordelivering this message to the intended recipient, you arehereby notified that any review, publication, dissemination,distribution, copying or use of the information in this messageis strictly prohibited. If you have received this e-mail byerror, please notify the sender immediately by replying to themessage and subsequently delete it from your system.E-mail is susceptible to data corruption, interception,unauthorized amendment, tampering and viruses. We only send andreceive e-mail messages on the basis that we are not liable forany such corruption, interception, amendment, tampering,viruses, any other reprehensible acts or any consequences ofthe aforementioned.</PRE></BLOCKQUOTE>---<BR>You are currently subscribed to vrf as: rsb@soco.agilent.com<BR>To subscribe send a blank email to "join-vrf@it.lists.it.agilent.com".<BR>To unsubscribe send a blank email to "leave-vrf@it.lists.it.agilent.com".<BR>To send messages to this mailing list, email "vrf@agilent.com". <BR>If you need help with the mailing list send a message to "owner-vrf@it.lists.it.agilent.com".</BODY></HTML>