Hi every body!
As said in a previous mail I have some difficulties to communicate with
my 33120 frequency generator (FG). I have to read a voltage via de
34401A multimeter while doing a frequency sweep with the FG. So I need
to stop my reading procedure (in fact a infinite loop) exactly when the
frequency sweep is over. I read that FG emits a TTL signal on its sync
output. Some of you advised me to poll commands to FG. May some one
explain me more serial poll commands to address to FG and how to do it
with HPVEE.
Thanks in advance.
--
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Johnny J. NOURRY
LPMC - Parc Valrose
06108 NICE CEDEX 2 - FRANCE
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Tel: (33)0492076719
Fax: (33)0492076754
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
E-mail: nourry@naxos.unice.fr
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Web: http://www.multimania.com/salazie/
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
As said in a previous mail I have some difficulties to communicate with
my 33120 frequency generator (FG). I have to read a voltage via de
34401A multimeter while doing a frequency sweep with the FG. So I need
to stop my reading procedure (in fact a infinite loop) exactly when the
frequency sweep is over. I read that FG emits a TTL signal on its sync
output. Some of you advised me to poll commands to FG. May some one
explain me more serial poll commands to address to FG and how to do it
with HPVEE.
Thanks in advance.
--
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Johnny J. NOURRY
LPMC - Parc Valrose
06108 NICE CEDEX 2 - FRANCE
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Tel: (33)0492076719
Fax: (33)0492076754
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
E-mail: nourry@naxos.unice.fr
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Web: http://www.multimania.com/salazie/
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
As said in a previous mail I have some difficulties to communicate with
my 33120 frequency generator (FG). I have to read a voltage via de
34401A multimeter while doing a frequency sweep with the FG. So I need
to stop my reading procedure (in fact a infinite loop) exactly when the
frequency sweep is over. I read that FG emits a TTL signal on its sync
output. Some of you advised me to poll commands to FG. May some one
explain me more serial poll commands to address to FG and how to do it
with HPVEE.
Thanks in advance.
--
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Johnny J. NOURRY
LPMC - Parc Valrose
06108 NICE CEDEX 2 - FRANCE
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Tel: (33)0492076719
Fax: (33)0492076754
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
E-mail: nourry@naxos.unice.fr
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Web: http://www.multimania.com/salazie/
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-