As Emily Latella used to say "Never Mind"
It took about an hour, it was apparently doing something
other than hanging.
Now to get it to actually work!
...Rob
----------
From: Marquardt, Rob[SMTP:ramarquardt@mke5.ra.rockwell.com]
Sent: Thursday, May 08, 1997 12:02 PM
To: hpvxd_xc
Subject: VRf: VEE 3.21 to VEE 4.0
Hi,
On an HP-UX 9, S700, I have converted a few libraries
to VEE 4.0 (compiled mode). They seemed to convert and run fine.
When I got to the main test program and clicked OK after selecting
compiled mode, VEE 4.0 just hung (at least it appears to be hung - it
could conceivably be doing something other than hanging).
It has been that way for the last 1/2 hour, I will give it a little
longer
before "kill -9"ing veetest.
Any suggestions on how to approach the conversion?
Thanks
Rob Marquardt
System Test Engineering
Rockwell Automation / Allen-Bradley
Milwaukee, Wisconsin, USA
It took about an hour, it was apparently doing something
other than hanging.
Now to get it to actually work!
...Rob
----------
From: Marquardt, Rob[SMTP:ramarquardt@mke5.ra.rockwell.com]
Sent: Thursday, May 08, 1997 12:02 PM
To: hpvxd_xc
Subject: VRf: VEE 3.21 to VEE 4.0
Hi,
On an HP-UX 9, S700, I have converted a few libraries
to VEE 4.0 (compiled mode). They seemed to convert and run fine.
When I got to the main test program and clicked OK after selecting
compiled mode, VEE 4.0 just hung (at least it appears to be hung - it
could conceivably be doing something other than hanging).
It has been that way for the last 1/2 hour, I will give it a little
longer
before "kill -9"ing veetest.
Any suggestions on how to approach the conversion?
Thanks
Rob Marquardt
System Test Engineering
Rockwell Automation / Allen-Bradley
Milwaukee, Wisconsin, USA
On an HP-UX 9, S700, I have converted a few libraries
to VEE 4.0 (compiled mode). They seemed to convert and run fine.
When I got to the main test program and clicked OK after selecting
compiled mode, VEE 4.0 just hung (at least it appears to be hung - it
could conceivably be doing something other than hanging).
It has been that way for the last 1/2 hour, I will give it a little
longer
before "kill -9"ing veetest.
Any suggestions on how to approach the conversion?
Thanks
Rob Marquardt
System Test Engineering
Rockwell Automation / Allen-Bradley
Milwaukee, Wisconsin, USA