Mitchell, Tom (T.P.) <tmitchel@visteon.com> wrote:
>
> > I installed a second RS-232 card in my PC after I installed VEE. The IRQ
> > is at 10 for this second card. I cannot get HPVEE to acknowledge COM2
> > even though windows detects COM2. Any ideas?
> >
Did you remember to configure SICL using "I/O Config"?
Recall that VEE talks thru SICL (or VISA) to do I/O. It is quite
easy to forget this step!
Stan
----------------------------------------------------------------------
Stan Bischof Agilent Technologies 707-577-3994 rsb@sr.hp.com
----------------------------------------------------------------------
---------------------------------------------------------------------
This is the "vrf" maillist, managed by Majordomo. To send messages to
this maillist, just email to "vrf@lvld.hp.com". Subscriptions and
unsubscriptions are done through the address "vrf-request@lvld.hp.com".
If you need details, just send a message containing the text "help"
to "vrf-request@lvld.hp.com".
---------------------------------------------------------------------
>
> > I installed a second RS-232 card in my PC after I installed VEE. The IRQ
> > is at 10 for this second card. I cannot get HPVEE to acknowledge COM2
> > even though windows detects COM2. Any ideas?
> >
Did you remember to configure SICL using "I/O Config"?
Recall that VEE talks thru SICL (or VISA) to do I/O. It is quite
easy to forget this step!
Stan
----------------------------------------------------------------------
Stan Bischof Agilent Technologies 707-577-3994 rsb@sr.hp.com
----------------------------------------------------------------------
---------------------------------------------------------------------
This is the "vrf" maillist, managed by Majordomo. To send messages to
this maillist, just email to "vrf@lvld.hp.com". Subscriptions and
unsubscriptions are done through the address "vrf-request@lvld.hp.com".
If you need details, just send a message containing the text "help"
to "vrf-request@lvld.hp.com".
---------------------------------------------------------------------
Tom Mitchell
Visteon Automotive Systems
Software Validation/Product Assurance
ETC Room B116
17000 Rotunda Drive
Dearborn, MI 48121
Voice/FAX number: (313) 323-9518 Text pager:(313) 795-2709
EMAIL:tmitchel@visteon.com
textpager 3137952709@alphapage.airtouch.com
> -----Original Message-----
> From: Mitchell, Tom (T.P.)
> Sent: Tuesday, February 22, 2000 2:39 PM
> To: HPVee Reflector (E-mail)
> Subject: RS-232 question
>
> I installed a second RS-232 card in my PC after I installed VEE. The IRQ
> is at 10 for this second card. I cannot get HPVEE to acknowledge COM2
> even though windows detects COM2. Any ideas?
>
> Tom Mitchell
> Visteon Automotive Systems
> Software Validation/Product Assurance
> ETC Room B116
> 17000 Rotunda Drive
> Dearborn, MI 48121
> Voice/FAX number: (313) 323-9518 Text pager:(313) 795-2709
> EMAIL:tmitchel@visteon.com
> textpager 3137952709@alphapage.airtouch.com
>
>
---------------------------------------------------------------------
This is the "vrf" maillist, managed by Majordomo. To send messages to
this maillist, just email to "vrf@lvld.hp.com". Subscriptions and
unsubscriptions are done through the address "vrf-request@lvld.hp.com".
If you need details, just send a message containing the text "help"
to "vrf-request@lvld.hp.com".
---------------------------------------------------------------------