I am getting 401 Y Axis data points (level) from a 8591 Spectrum
Analyser with no X Axis (frequency) information.
I would like to match each Y data point to the appropiate frequency
point and display on a X Vs Y or Magnitude Spectrum graph within VEE.
If anyone can help me it would be most appreciated.
John McBain
Product Compliance Engineer
Swichtec Power Systems Ltd
39 Princess St Ph: (++64) 3 343 7440 ext 8498
PO Box 11-188 Fax:(++64) 3 343 5100
Christchurch E-Mail: jmcbain@swichtec.co.nz
NEW ZEALAND
visit us at http:\www.swichtec.co.nz
Analyser with no X Axis (frequency) information.
I would like to match each Y data point to the appropiate frequency
point and display on a X Vs Y or Magnitude Spectrum graph within VEE.
If anyone can help me it would be most appreciated.
John McBain
Product Compliance Engineer
Swichtec Power Systems Ltd
39 Princess St Ph: (++64) 3 343 7440 ext 8498
PO Box 11-188 Fax:(++64) 3 343 5100
Christchurch E-Mail: jmcbain@swichtec.co.nz
NEW ZEALAND
visit us at http:\www.swichtec.co.nz
Hi
We're using the MicroLink CAN-interface from I+ME. It's using RS232. For
this we've made drivers written in HP VEE. A library file with some
UserFunctions.The MicroLink uses the Motorola processor 68HC705x4 with
internal CAN-controller.
Best Regards / Stefan Hg
Stefan Hg
Test Engineer, Production Department
Esab Welding Equipment AB
Box 106
S-695 81 LAX
Sweden
---------------------------------------------------------------------------
---------------------------------------------------------------------
"Mulder, Johannes" <jcm@eo.ie.philips.nl> on 98-06-17 13:39:11
To: "'hpvxd_xc@hpislsup.lvld.hp.com'" <hpvxd_xc@hpislsup.lvld.hp.com>
cc: (bcc: Stefan Hg/Laxa/ESAB)
Subject: Vrf: HPVEE and CAN, is this done before?