Skip navigation

News

Top & Trending
Damon
 Recently, I touched two kinds of mixer vector measurement method (R&S and Keysight) and made a comparison with them. All of parameters except reflection response is ok. The responses are as follows.   ##   It is obviously, the reflection response of these two method has huge differences, even in the trend. Although
7

aguntuk
Hi experts, I am having problem with S-parameter simulation of 4 port for tranmission line. I have used "LTLINE2" component as my channel and I want to use this channel later for high-speed SERDES communication with differential TX/RX. But before that I need to know channel characteristics. May be after building a good channel here I can export
6
Top & Trending
_biggles
Hi, I am using an Agilent 8163B mainframe (with 81940A laser module in slot 1 and 81980A laser module in slot 2) to measure BFB fiber laser with a photodiode.  The system is controlled by LabView over GPIB.   The GPIB commands sweeps laser 2 from 1520 nm to 1570 nm at 5 nm/sec.  Output trigger is latched by the start sweep
7