Top & Trending
Which is max. readout frequency for current draw measurements ? GPIB interface is currently used. Port 0..25 V was used. I experienced approx. 4 current draw values per second as max readout frequency via GPIB. Is this documented somewhere ? I did not yet found this in the 'User's manual' .
Good morning, I have a question on the N8736A power supply. We have one and we program it via Analog signal. We noticed that the OVP protection triggers without measuring with an oscilloscope a voltage at the output. Is it possible that if OVP protection is programmed at 40V and we apply an analog signal that should drive the PS output over