• EMC Basics: What is Radiated Emissions & Immunity Testing?

    After reading my last blog you’ve been given a brief intro on What are EMC & EMI Measurements and why it is important to measure for to ensure your device is pre-compliant.   In this blog we’...
    nickben
    last modified by nickben
  • EMC Basics: What are EMC & EMI Measurements and Why We Care

    Introduction: Conceptualizing your next product, designing it, and then releasing it to market are more or less the main phases encountered during a product development cycle. But what if you had gotten as far as fin...
    nickben
    last modified by nickben
  • Sadly, Aging is Happening to Me, to You and to Your Signal Analyzer

      Fortunately, we can make things better—for your signal analyzer   Note from Ben Zarlingo: This guest post comes to us from Bill Scharf, a Keysight engineer with long experience in microwave sig...
    benz
    last modified by benz
  • The Real Power of Engineering: Creating the Future vs. Predicting it

      Adapting to future circumstances instead of expecting to anticipate them  There’s nothing inherently wrong with trying to predict the future, whether that of technology or any other area. It’s ...
    benz
    last modified by benz
  • RF Interference Will Hobble Us Before the Spectrum Apocalypse Arrives

      Spectrum crowding is bad, but I think interference is worse He’s guilty of some degree of hyperbole, but Lou Frenzel highlights a fundamental issue in his recent column Spectrum Apocalypse: The Coming Dea...
    benz
    last modified by benz
  • Keeping up with Measurement “Fundamentals”

      While some are timeless, others evolve This post will be brief, partly a consequence of the wildfires that have affected the Santa Rosa headquarters of Keysight and modified all our schedules, at least a littl...
    benz
    last modified by benz
  • Dawn of the Vector Signal Analyzer

      A new RF tool leveraged two evolving technologies These days, vector signal analyzers (VSAs) are in broad use, especially in wireless, aerospace, and defense applications. They’re essential for designing ...
    benz
    last modified by benz
  • Unintended Oscillations and Interference Problems

      Avoiding extra functionality in your circuits A common saying among electrical engineers is that if you want an oscillator, try building an amplifier. This is all too often accurate, and unwanted oscillations i...
    benz
    last modified by benz
  • One Solution to Complexity: Focus on the Most Common Measurement Errors

      A pre-filter to manage an excess of information In the first two decades of the modern spectrum analyzer—say from the 1960s to the 1980s—it was arguably possible for an RF engineer to know almost ev...
    benz
    last modified by benz
  • Better Millimeter-wave Measurements with New Preselection Technology

      When gems turn to coal, engineers get creative Despite their flaws, I have described YIG preselector filters as the gems in microwave signal analyzers. These preselectors solve a problem created when mixers are...
    benz
    last modified by benz
  • Measurement Techniques and Strategies for the Interference of Things

      Bring your best engineering game, and use all the measurement tools available The term Internet of Things (IoT) has been around a few years, and sometimes it feels over-hyped. When some folks start musing breat...
    benz
    last modified by benz
  • Improving ACPR Measurements with the Tukey Window

      Making other windows seem a little wasteful A proverb that’s perhaps 2,000 years old describes the mills of the gods as “grinding slowly but exceedingly fine.” I’d like to flatter myself...
    benz
    last modified by benz
  • Millimeter Measurements: Beware of Changes in Connector Scale

      Taking extra care in the lands of the large and the small Recently, I found myself peering at a dial indicator while checking the blade runout on my shiny new 12-inch miter saw. I’m putting up new trim in...
    benz
    last modified by benz
  • It’s RF interference again…

      The case of the troublesome garage door opener   Note from Ben: This is the first in a series of guest posts from Jennifer Stark of Keysight. As discussed here earlier, our increasingly crowded RF environ...
    benz
    last modified by benz
  • Spotting Difficult Noise Figure Measurements

      A quick, intuitive look at what will make them challenging Noise is fundamental in much of what RF engineers do, and it drives cost/performance tradeoffs in major ways. If you’ve read this blog much, you&...
    benz
    last modified by benz
  • The Four Ws of Noise Figure

      If you're going to optimize it you have to quantify it   Note from Ben Zarlingo: This is the second in our series of guest posts by Nick Ben, a Keysight engineer. Here he turns his attention to the f...
    benz
    last modified by benz
  • Phase Noise and Distortion Measurements

    Originally posted May 3, 2016   Understanding how it limits dynamic range and what to do about it   A talented RF engineer and friend of mine is known for saying “Life is a microcosm of phase noise.&...
    benz
    last modified by benz
  • Voltage and Power Add Differently: Understanding Signal Power Measurement

      The difference can be anything from 0 dB to infinity Most RF engineers are aware that signal measurements are always a combination of the signal in question and any contributions from the measuring device. We u...
    benz
    last modified by benz
  • Better Measurements at Centimeter and Millimeter Bands

      Handling the frequency and bandwidth challenges of 5G, radar, and more 5G technologies and markets are much in the news these days, and for good reasons. The economic potential is large, the opportunities are r...
    benz
    last modified by benz
  • Your Spectrum Measurements May Be More Average Than You Know

    Originally posted Jul 21, 2014 I’m not talking about the quality, just the variance The basic amplitude accuracy of today’s signal analyzers is amazingly good, sometimes significantly better than ...
    benz
    last modified by benz