Log in to follow, share, and participate in this community. Can I generate a Multitone signal with 10 Hz spacing when using the N8267A PSG and the M8190A Arb? What conditions should I watch out for? Hello: I have 30+ emitters at different frequencies and different PRI/PW/agility structures and scan/antenna patterns. I need to sequence them so that each gets emitted to some time pattern. I am creating these ... When using N7610C API to generate an 802.15.4 frame, the resulting Data Length is wrong. The MAC payload length is configured using: api.WaveformSettings.PhyPayload.DataLength = X api.WaveformSettings.ZBSetti... Hello: Can we specify different pulse types such as Trapezoidal pulse in MESG software? When we select pulse type it only has one pulse option. Doesn't it have other pulse types yet? Will you inc... Hello: In MESG, we can model pulses, MOP, and antenna patterns and so on. Can we model Doppler shift on the signal /pulses? If so how can we do that? If you could give an example that would be greatly appreciated. ... In the config guide of - M9381A PXIe Vector Signal Generator M9391A PXIe Vector Signal Analyzer on Page 20, it refers to LTE signal studio options N7624B. These options are not availab... Can anybody help me with Alteryx Workflow Details Template. I want to cover Workflow details in an excel file for requirement gathering. Initially asked in the Generators forum, but probably is more sensible to ask the question here. We are considering a second hand unit which includes "E4438C-406 Signal Studio for Bluetooth®, Fixed Perpetu... How many UXGs do I need to create N pulses at the same time (pulse-on-pulse)? How do I configure multi-channel, multi-port systems for pulse-on-pulse with angle-of-arrival? Is there a way to put insert a missing pulse into the signal? How do I change the 10 MHz reference source if Signal Studio for pulse building doesn’t detect the reference? Are there any options to adjust the pulse definitions within Signal Studio for pulse building? Is it possible to adjust the phase offset using degrees instead of radians? How do I set the coherent processing interval (CPI) – the number of pulses for a pulse repetition interval (PRI)? How do I create a track-while-scan mode with both search and tracking dwells? How do I configure the test system and system under test to create angle-of-arrival? How do I create CW and FMCW? How do I create a fire-control mode? (Lobe on target). How do I time my modes to correspond to kinematics? How do I create random or periodic frequency, PW, or PRI jitter?